It is easier to understand for using "voltage_dis" to keep the same logic for
voltage selection and off/on.
>Add some error checking and implement functionality a little bit
>differently.
>
>Signed-off-by: Antti Palosaari <cr...@iki.fi>
>---
> drivers/media/dvb-frontends/m88ds3103.c | 50 ++++++++++++++++++++++-----------
> 1 file changed, 34 insertions(+), 16 deletions(-)
>
>diff --git a/drivers/media/dvb-frontends/m88ds3103.c
>b/drivers/media/dvb-frontends/m88ds3103.c
>index 238b04e..d8fbdfd 100644
>--- a/drivers/media/dvb-frontends/m88ds3103.c
>+++ b/drivers/media/dvb-frontends/m88ds3103.c
>@@ -1038,36 +1038,54 @@ err:
> }
>
> static int m88ds3103_set_voltage(struct dvb_frontend *fe,
>- fe_sec_voltage_t voltage)
>+ fe_sec_voltage_t fe_sec_voltage)
> {
> struct m88ds3103_priv *priv = fe->demodulator_priv;
>- u8 data;
>+ int ret;
>+ u8 u8tmp;
>+ bool voltage_sel, voltage_en;
bool voltage_sel, voltage_dis;
>
>- m88ds3103_rd_reg(priv, 0xa2, &data);
>+ dev_dbg(&priv->i2c->dev, "%s: fe_sec_voltage=%d\n", __func__,
>+ fe_sec_voltage);
>
>- data &= ~0x03; /* bit0 V/H, bit1 off/on */
>- if (priv->cfg->lnb_en_pol)
>- data |= 0x02;
>+ if (!priv->warm) {
>+ ret = -EAGAIN;
>+ goto err;
>+ }
>
>- switch (voltage) {
>+ switch (fe_sec_voltage) {
> case SEC_VOLTAGE_18:
>- if (priv->cfg->lnb_hv_pol == 0)
>- data |= 0x01;
>+ voltage_sel = 1;
>+ voltage_en = 1;
voltage_dis = 0;
> break;
> case SEC_VOLTAGE_13:
>- if (priv->cfg->lnb_hv_pol)
>- data |= 0x01;
>+ voltage_sel = 0;
>+ voltage_en = 1;
voltage_dis = 0;
> break;
> case SEC_VOLTAGE_OFF:
>- if (priv->cfg->lnb_en_pol)
>- data &= ~0x02;
>- else
>- data |= 0x02;
>+ voltage_sel = 0;
>+ voltage_en = 0;
voltage_dis = 1;
> break;
>+ default:
>+ dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_voltage\n",
>+ __func__);
>+ ret = -EINVAL;
>+ goto err;
> }
>- m88ds3103_wr_reg(priv, 0xa2, data);
>+
>+ /* output pin polarity */
>+ voltage_sel ^= priv->cfg->lnb_hv_pol;
>+ voltage_en ^= !priv->cfg->lnb_en_pol;
voltage_dis ^= priv->cfg->lnb_en_pol;
>+
>+ u8tmp = voltage_en << 1 | voltage_sel << 0;
u8tmp = voltage_dis << 1 | voltage_sel << 0;
>+ ret = m88ds3103_wr_reg_mask(priv, 0xa2, u8tmp, 0x03);
>+ if (ret)
>+ goto err;
>
> return 0;
>+err:
>+ dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
>+ return ret;
> }
>
> static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe,
>--
>http://palosaari.fi/
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-media" in
>the body of a message to majord...@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
