On 08/18/2014 11:51 AM, Mauro Carvalho Chehab wrote:
> Right now, the au0828 driver uses .tuner to detect if analog
> tv is being used or not. By not filling .tuner fields at the
> board struct, the I2C core can't do decisions based on it.
>
> So, add a field to explicitly tell when analog TV is supported.
>
> No functional changes.
>
> Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com>
> ---
> drivers/media/usb/au0828/au0828-cards.c | 10 +++-------
> drivers/media/usb/au0828/au0828.h | 1 +
> 2 files changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/usb/au0828/au0828-cards.c
> b/drivers/media/usb/au0828/au0828-cards.c
> index 2c6b7da137ed..8f2fc2fe6a89 100644
> --- a/drivers/media/usb/au0828/au0828-cards.c
> +++ b/drivers/media/usb/au0828/au0828-cards.c
> @@ -46,6 +46,7 @@ struct au0828_board au0828_boards[] = {
> .name = "Hauppauge HVR850",
> .tuner_type = TUNER_XC5000,
> .tuner_addr = 0x61,
> + .has_analog = 1,
> .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
> .input = {
> {
> @@ -72,12 +73,7 @@ struct au0828_board au0828_boards[] = {
> .tuner_type = TUNER_XC5000,
> .tuner_addr = 0x61,
> .has_ir_i2c = 1,
> - /* The au0828 hardware i2c implementation does not properly
> - support the xc5000's i2c clock stretching. So we need to
> - lower the clock frequency enough where the 15us clock
> - stretch fits inside of a normal clock cycle, or else the
> - au0828 fails to set the STOP bit. A 30 KHz clock puts the
> - clock pulse width at 18us */
Why was this comment block dropped? The commit message makes no mention of it.
> + .has_analog = 1,
> .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
> .input = {
> {
> @@ -232,7 +228,7 @@ void au0828_card_analog_fe_setup(struct au0828_dev *dev)
> }
>
> /* Setup tuners */
> - if (dev->board.tuner_type != TUNER_ABSENT) {
> + if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) {
This tests against TUNER_ABSENT and, even after applying patch 2, the 'Unknown
Board' struct still specifies UNSET instead of TUNER_ABSENT. Can you change
that as well in patch 2?
This UNSET/TUNER_ABSENT confusion is similar to what I found in cx23885. I think
there are several drivers that are all inconsistent in how they handle this.
Regards,
Hans
> /* Load the tuner module, which does the attach */
> sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
> "tuner", dev->board.tuner_addr, NULL);
> diff --git a/drivers/media/usb/au0828/au0828.h
> b/drivers/media/usb/au0828/au0828.h
> index 96bec05d7dac..20b82ba5be6c 100644
> --- a/drivers/media/usb/au0828/au0828.h
> +++ b/drivers/media/usb/au0828/au0828.h
> @@ -89,6 +89,7 @@ struct au0828_board {
> unsigned char tuner_addr;
> unsigned char i2c_clk_divider;
> unsigned char has_ir_i2c:1;
> + unsigned char has_analog:1;
> struct au0828_input input[AU0828_MAX_INPUT];
>
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
