On 07/15/2014 04:35 AM, Antti Palosaari wrote:
> On 07/14/2014 11:01 PM, Hans Verkuil wrote:
>> On 07/14/2014 09:55 PM, Antti Palosaari wrote:
>>> I actually ran v4l2-compliance and there was problem with ADC band
>>> enumeration. v4l2-compliance didn't liked as ADC freq was just 20MHz,
>>> both upper and lower limit. Due to that I added even small hack to driver,
>>>
>>> +           .rangelow   = 20000000,
>>> +           .rangehigh  = 20000001, /* FIXME: make v4l2-compliance happy */
>>
>> Hmm, does the latest v4l2-compliance (direct from the git repo) still fail on
>> that? That shouldn't be a problem, and I don't see that here either if I try 
>> that
>> myself.
>>
>> If it still fails, can you show me the error message?
> 
> [crope@localhost gr-analog]$ ls -l /usr/local/bin/v4l2-compliance
> -rwxr-xr-x. 1 root root 1497964 Jul 14 22:50 /usr/local/bin/v4l2-compliance
> [crope@localhost gr-analog]$ /usr/local/bin/v4l2-compliance -S 
> /dev/swradio0 -s
> Driver Info:
>       Driver name   : airspy
>       Card type     : AirSpy SDR
>       Bus info      : usb-0000:00:13.2-2
>       Driver version: 3.15.0
>       Capabilities  : 0x85110000
>               SDR Capture
>               Tuner
>               Read/Write
>               Streaming
>               Device Capabilities
>       Device Caps   : 0x05110000
>               SDR Capture
>               Tuner
>               Read/Write
>               Streaming
> 
> Compliance test for device /dev/swradio0 (not using libv4l2):
> 
> Required ioctls:
>       test VIDIOC_QUERYCAP: OK
> 
> Allow for multiple opens:
>       test second sdr open: OK
>       test VIDIOC_QUERYCAP: OK
>       test VIDIOC_G/S_PRIORITY: OK
> 
> Debug ioctls:
>       test VIDIOC_DBG_G/S_REGISTER: OK
>       test VIDIOC_LOG_STATUS: OK
> 
> Input ioctls:
>               fail: v4l2-test-input-output.cpp(107): rangelow >= rangehigh
>               fail: v4l2-test-input-output.cpp(190): invalid tuner 0
>       test VIDIOC_G/S_TUNER: FAIL
>               fail: v4l2-test-input-output.cpp(290): could get frequency for 
> invalid 

Try again, it should be fixed now.

Regards,

        Hans

> tuner 0
>       test VIDIOC_G/S_FREQUENCY: FAIL
>       test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>       test VIDIOC_ENUMAUDIO: OK (Not Supported)
>       test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>       test VIDIOC_G/S_AUDIO: OK (Not Supported)
>       Inputs: 0 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
>       test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>       test VIDIOC_G/S_FREQUENCY: OK
>       test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>       test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>       test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>       Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
>       test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>       test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>       test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>       test VIDIOC_G/S_EDID: OK (Not Supported)
> 
>       Control ioctls:
>               test VIDIOC_QUERYCTRL/MENU: OK
>               test VIDIOC_G/S_CTRL: OK
>               test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>               test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>               test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>               Standard Controls: 6 Private Controls: 0
> 
>       Format ioctls:
>               test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>               test VIDIOC_G/S_PARM: OK (Not Supported)
>               test VIDIOC_G_FBUF: OK (Not Supported)
>               test VIDIOC_G_FMT: OK
>               test VIDIOC_TRY_FMT: OK
>               test VIDIOC_S_FMT: OK
>               test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> 
>       Codec ioctls:
>               test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>               test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>               test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
>       Buffer ioctls:
>               test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>               test VIDIOC_EXPBUF: OK (Not Supported)
> 
> Streaming ioctls:
>       test read/write: OK
>       test MMAP: OK
>       test USERPTR: OK
>       test DMABUF: OK
> 
> Total: 42, Succeeded: 40, Failed: 2, Warnings: 0
> [crope@localhost gr-analog]$
> 
> 
> regards
> Antti
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to