Moikka Paavo
On 14.02.2014 21:14, Paavo Leinonen wrote:
Hi,
I plugged in an old Anysee DVB-C and got “Unsupported Anysee version” error.
The box is Fedora 15 running 3.11.10-100.fc18.x86_64 kernel.
Can I do something to get it working or help you to support it?
Note: I’m not 100% sure the Anysee HW is working, but I assume so.
I think that is some old DVB-C only Anysee E30C model, having black
case? It should be working ages, unless there is no new hardware revisions.
* E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
* PCB: 507FA (rev0.4)
* parts: TDA10023, DTOS403IH102B TM, TDA8024
* OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
* IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
* IOD[5] TDA10023 1=enabled
* IOE[0] tuner 1=enabled
regards
Antti
-Paavo
[75103.843017] usb 2-3: new high-speed USB device number 5 using ehci-pci
[75104.593493] usb 2-3: device descriptor read/all, error -71
[75105.085016] usb 2-3: new high-speed USB device number 7 using ehci-pci
[75106.542413] usb 2-3: config 1 interface 0 altsetting 0 bulk endpoint
0x1 has invalid maxpacket 64
[75106.542426] usb 2-3: config 1 interface 0 altsetting 0 bulk endpoint
0x81 has invalid maxpacket 64
[75106.542435] usb 2-3: config 1 interface 0 altsetting 1 bulk endpoint
0x1 has invalid maxpacket 64
[75106.542445] usb 2-3: config 1 interface 0 altsetting 1 bulk endpoint
0x81 has invalid maxpacket 64
[75106.542786] usb 2-3: New USB device found, idVendor=1c73, idProduct=861f
[75106.542797] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[75106.542805] usb 2-3: Product: anysee-FA(LP)
[75106.542811] usb 2-3: Manufacturer: AMT.CO.KR
[75106.543148] usb 2-3: dvb_usb_v2: found a 'Anysee' in warm state
[75106.544411] usb 2-3: dvb_usb_anysee: firmware version 1.2 hardware id 15
[75106.544460] usb 2-3: dvb_usb_v2: will pass the complete MPEG2
transport stream to the software demuxer
[75106.544496] DVB: registering new adapter (Anysee)
[75106.553168] usb 2-3: dvb_usb_anysee: Unsupported Anysee version.
Please report to <linux-media@vger.kernel.org>.
[75106.553187] usb 2-3: dvb_usb_v2: 'Anysee' error while loading driver
(-19)
[75106.554204] usb 2-3: dvb_usb_v2: 'Anysee' successfully deinitialized
and disconnected
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
