On 02/05/14 17:42, Laurent Pinchart wrote:
> Replace the ADV7604-specific hotplug notifier with a GPIO to control the
> HPD pin directly instead of going through the bridge driver.

Hmm, that's not going to work for me. I don't have a GPIO pin here, instead
it is a bit in a register that I have to set.

> 
> Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> ---
>  drivers/media/i2c/adv7604.c | 47 
> +++++++++++++++++++++++++++++++++++++++++----
>  include/media/adv7604.h     |  5 ++++-
>  2 files changed, 47 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 369cb1e..2f38071 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -28,6 +28,7 @@
>   */
>  
>  #include <linux/delay.h>
> +#include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> @@ -608,6 +609,23 @@ static inline int edid_write_block(struct v4l2_subdev 
> *sd,
>       return err;
>  }
>  
> +static void adv7604_set_hpd(struct adv7604_state *state, unsigned int hpd)
> +{
> +     unsigned int i;
> +
> +     for (i = 0; i < state->info->num_dv_ports; ++i) {
> +             unsigned int enable = hpd & BIT(i);
> +
> +             if (IS_ERR_VALUE(state->pdata.hpd_gpio[i]))

IS_ERR_VALUE: that's normally used for pointers, not integers. I would
much prefer something simple like 'bool hpd_use_gpio[4]'.

Regards,

        Hans

> +                     continue;
> +
> +             if (state->pdata.hpd_gpio_low[i])
> +                     enable = !enable;
> +
> +             gpio_set_value_cansleep(state->pdata.hpd_gpio[i], enable);
> +     }
> +}
> +
>  static void adv7604_delayed_work_enable_hotplug(struct work_struct *work)
>  {
>       struct delayed_work *dwork = to_delayed_work(work);
> @@ -617,7 +635,7 @@ static void adv7604_delayed_work_enable_hotplug(struct 
> work_struct *work)
>  
>       v4l2_dbg(2, debug, sd, "%s: enable hotplug\n", __func__);
>  
> -     v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)&state->edid.present);
> +     adv7604_set_hpd(state, state->edid.present);
>  }
>  
>  static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg)
> @@ -2022,7 +2040,6 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, 
> struct v4l2_subdev_edid *edi
>       struct adv7604_state *state = to_state(sd);
>       const struct adv7604_chip_info *info = state->info;
>       int spa_loc;
> -     int tmp = 0;
>       int err;
>       int i;
>  
> @@ -2033,7 +2050,7 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, 
> struct v4l2_subdev_edid *edi
>       if (edid->blocks == 0) {
>               /* Disable hotplug and I2C access to EDID RAM from DDC port */
>               state->edid.present &= ~(1 << edid->pad);
> -             v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void 
> *)&state->edid.present);
> +             adv7604_set_hpd(state, state->edid.present);
>               rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 
> state->edid.present);
>  
>               /* Fall back to a 16:9 aspect ratio */
> @@ -2059,7 +2076,7 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, 
> struct v4l2_subdev_edid *edi
>  
>       /* Disable hotplug and I2C access to EDID RAM from DDC port */
>       cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
> -     v4l2_subdev_notify(sd, ADV7604_HOTPLUG, (void *)&tmp);
> +     adv7604_set_hpd(state, 0);
>       rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 0x00);
>  
>       spa_loc = get_edid_spa_location(edid->edid);
> @@ -2655,6 +2672,28 @@ static int adv7604_probe(struct i2c_client *client,
>               return -ENODEV;
>       }
>       state->pdata = *pdata;
> +
> +     /* Request GPIOs. */
> +     for (i = 0; i < state->info->num_dv_ports; ++i) {
> +             char name[5];
> +
> +             if (IS_ERR_VALUE(state->pdata.hpd_gpio[i]))
> +                     continue;
> +
> +             sprintf(name, "hpd%u", i);
> +             err = devm_gpio_request_one(&client->dev,
> +                                         state->pdata.hpd_gpio[i],
> +                                         state->pdata.hpd_gpio_low[i] ?
> +                                         GPIOF_OUT_INIT_HIGH :
> +                                         GPIOF_OUT_INIT_LOW,
> +                                         name);
> +             if (err < 0) {
> +                     v4l_err(client, "Failed to request HPD %u GPIO (%u)\n",
> +                             i, state->pdata.hpd_gpio[i]);
> +                     return err;
> +             }
> +     }
> +
>       state->timings = cea640x480;
>       state->format = adv7604_format_info(state, V4L2_MBUS_FMT_YUYV8_2X8);
>  
> diff --git a/include/media/adv7604.h b/include/media/adv7604.h
> index 4da678c..dddb0cb 100644
> --- a/include/media/adv7604.h
> +++ b/include/media/adv7604.h
> @@ -90,6 +90,10 @@ struct adv7604_platform_data {
>       /* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */
>       unsigned disable_cable_det_rst:1;
>  
> +     /* Hot-Plug Detect control GPIOs */
> +     int hpd_gpio[4];
> +     bool hpd_gpio_low[4];
> +
>       /* Analog input muxing mode */
>       enum adv7604_ain_sel ain_sel;
>  
> @@ -133,7 +137,6 @@ struct adv7604_platform_data {
>  #define V4L2_CID_ADV_RX_FREE_RUN_COLOR               (V4L2_CID_DV_CLASS_BASE 
> + 0x1002)
>  
>  /* notify events */
> -#define ADV7604_HOTPLUG              1
>  #define ADV7604_FMT_CHANGE   2
>  
>  #endif
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to