Am 04.01.2014 11:55, schrieb Mauro Carvalho Chehab:
> The proper error code for I2C errors are EREMOTEIO. The em28xx driver
> is using EIO instead.
>
> Replace all occurrences of EIO at em28xx-i2c, in order to fix it.
>
> Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com>
> ---
> drivers/media/usb/em28xx/em28xx-i2c.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c
> b/drivers/media/usb/em28xx/em28xx-i2c.c
> index 9fa7ed51e5b1..8b35aa51b9bb 100644
> --- a/drivers/media/usb/em28xx/em28xx-i2c.c
> +++ b/drivers/media/usb/em28xx/em28xx-i2c.c
> @@ -72,7 +72,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8
> addr, u8 *buf, u16 len)
> if (ret != 2 + len) {
> em28xx_warn("failed to trigger write to i2c address 0x%x
> (error=%i)\n",
> addr, ret);
> - return (ret < 0) ? ret : -EIO;
> + return (ret < 0) ? ret : -EREMOTEIO;
> }
> /* wait for completion */
> while (time_is_after_jiffies(timeout)) {
> @@ -91,7 +91,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8
> addr, u8 *buf, u16 len)
> msleep(5);
> }
> em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
> - return -EIO;
> + return -EREMOTEIO;
> }
>
> /*
> @@ -115,7 +115,7 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8
> addr, u8 *buf, u16 len)
> if (ret != 2) {
> em28xx_warn("failed to trigger read from i2c address 0x%x
> (error=%i)\n",
> addr, ret);
> - return (ret < 0) ? ret : -EIO;
> + return (ret < 0) ? ret : -EREMOTEIO;
> }
>
> /* wait for completion */
> @@ -142,7 +142,7 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8
> addr, u8 *buf, u16 len)
> if (ret != len) {
> em28xx_warn("reading from i2c device at 0x%x failed: couldn't
> get the received message from the bridge (error=%i)\n",
> addr, ret);
> - return (ret < 0) ? ret : -EIO;
> + return (ret < 0) ? ret : -EREMOTEIO;
> }
> for (i = 0; i < len; i++)
> buf[i] = buf2[len - 1 - i];
> @@ -162,7 +162,7 @@ static int em2800_i2c_check_for_device(struct em28xx
> *dev, u8 addr)
> ret = em2800_i2c_recv_bytes(dev, addr, &buf, 1);
> if (ret == 1)
> return 0;
> - return (ret < 0) ? ret : -EIO;
> + return (ret < 0) ? ret : -EREMOTEIO;
> }
>
> /*
> @@ -191,7 +191,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16
> addr, u8 *buf,
> } else {
> em28xx_warn("%i bytes write to i2c device at 0x%x
> requested, but %i bytes written\n",
> len, addr, ret);
> - return -EIO;
> + return -EREMOTEIO;
> }
> }
>
> @@ -219,7 +219,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16
> addr, u8 *buf,
> }
>
> em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
> - return -EIO;
> + return -EREMOTEIO;
> }
>
> /*
> @@ -268,7 +268,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16
> addr, u8 *buf, u16 len)
> }
>
> em28xx_warn("unknown i2c error (status=%i)\n", ret);
> - return -EIO;
> + return -EREMOTEIO;
> }
>
> /*
> @@ -283,7 +283,7 @@ static int em28xx_i2c_check_for_device(struct em28xx
> *dev, u16 addr)
> ret = em28xx_i2c_recv_bytes(dev, addr, &buf, 1);
> if (ret == 1)
> return 0;
> - return (ret < 0) ? ret : -EIO;
> + return (ret < 0) ? ret : -EREMOTEIO;
> }
>
> /*
> @@ -312,7 +312,7 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev,
> u16 addr, u8 *buf,
> } else {
> em28xx_warn("%i bytes write to i2c device at 0x%x
> requested, but %i bytes written\n",
> len, addr, ret);
> - return -EIO;
> + return -EREMOTEIO;
> }
> }
> /* Check success */
Why the hell -EREMOTEIO ???
See Documentation/i2c/fault-codes.
It's not even listed there !
What are you trying to fix here ?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
