(This patch is RFC, because it was compiled and tested against kernel
v3.5)

videobuf2 file I/O emulation assumed that buffers dequeued from the
driver would return in the order they were enqueued in the driver. 

Improve the file I/O emulator's book-keeping to remove this assumption.

Also remove the, AFAICT, assumption that only read() calls would need to
dequeue a buffer from the driver.

Also set the buf->size properly, if a write() dequeues a buffer.


Signed-off-by: Andy Walls <awa...@md.metrocast.net>
Cc: Kyungmin Park <kyungmin.p...@samsung.com>
Cc: PawelOsciak<pa...@osciak.com>
Cc: Marek Szyprowski <m.szyprow...@samsung.com>


diff --git a/drivers/media/video/videobuf2-core.c 
b/drivers/media/video/videobuf2-core.c
index 9d4e9ed..f330aa4 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -1796,6 +1796,7 @@ struct vb2_fileio_data {
        unsigned int dq_count;
        unsigned int flags;
 };
+#define FILEIO_INDEX_NOT_SET   ((unsigned int) INT_MAX)
 
 /**
  * __vb2_init_fileio() - initialize file io emulator
@@ -1889,6 +1890,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int 
read)
                                goto err_reqbufs;
                        fileio->bufs[i].queued = 1;
                }
+               fileio->index = FILEIO_INDEX_NOT_SET;
 
                /*
                 * Start streaming.
@@ -1975,15 +1977,11 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, 
char __user *data, size_
         */
        q->fileio = NULL;
 
-       index = fileio->index;
-       buf = &fileio->bufs[index];
-
        /*
         * Check if we need to dequeue the buffer.
         */
-       if (buf->queued) {
-               struct vb2_buffer *vb;
-
+       index = fileio->index;
+       if (index == FILEIO_INDEX_NOT_SET) {
                /*
                 * Call vb2_dqbuf to get buffer back.
                 */
@@ -1997,12 +1995,19 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, 
char __user *data, size_
                        goto end;
                fileio->dq_count += 1;
 
+               fileio->index = fileio->b.index;
+               index = fileio->index;
+               buf = &fileio->bufs[index];
+               
                /*
                 * Get number of bytes filled by the driver
                 */
-               vb = q->bufs[index];
-               buf->size = vb2_get_plane_payload(vb, 0);
+               buf->pos = 0;
                buf->queued = 0;
+               buf->size = read ? vb2_get_plane_payload(q->bufs[index], 0)
+                                : vb2_plane_size(q->bufs[index], 0);
+       } else {
+               buf = &fileio->bufs[index];
        }
 
        /*
@@ -2070,13 +2075,28 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, 
char __user *data, size_
                 */
                buf->pos = 0;
                buf->queued = 1;
-               buf->size = q->bufs[0]->v4l2_planes[0].length;
+               buf->size = vb2_plane_size(q->bufs[index], 0);
                fileio->q_count += 1;
 
                /*
-                * Switch to the next buffer
+                * Decide on the next buffer
                 */
-               fileio->index = (index + 1) % q->num_buffers;
+               if (read || (q->num_buffers == 1)) {
+                       /* Use the next buffer the driver provides back */
+                       fileio->index = FILEIO_INDEX_NOT_SET;
+               } else {
+                       /* Prefer a buffer that is not quequed in the driver */
+                       int initial_index = fileio->index;
+                       fileio->index = FILEIO_INDEX_NOT_SET;
+                       do {
+                               if (++index == q->num_buffers)
+                                       index = 0;
+                               if (!fileio->bufs[index].queued) {
+                                       fileio->index = index;
+                                       break;
+                               }
+                       } while (index != initial_index);
+               }
 
                /*
                 * Start streaming if required.


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to