(now with an attachement)
On 30.10.2013 17:16, Wolfram Sang wrote:
Hi,
sorry for the delay. The Kernel Summit made a pretty busy time out of
the last weeks...
I found one of my drivers was crashing when DTV USB stick was
plugged. Patch in that mail patch fixes the problem.
Well, if you have a parent, it should be set. This is always a good
idea. Can't really tell why not having it causes the BUG, though.
I quickly looked possible I2C patches causing the problem and saw
that one as most suspicions:
commit 3923172b3d700486c1ca24df9c4c5405a83e2309
i2c: reduce parent checking to a NOOP in non-I2C_MUX case
Did you try reverting it? I am not sure this is the one.
Nope, not to mentio bisect. I have done bisect few times and I am not
going to waste whole day of compiling and booting new kernels.
Crash disappeared whit that little patch. I did also some DVB USB core
changes for 3.12, but I cannot see it could be root of cause that crash.
i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered
BUG: unable to handle kernel NULL pointer dereference at 0000000000000220
IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core]
Can we have the full BUG output?
See attachement.
Anyway, I am going to ask Mauro to merge that I2C parent patch and maybe
try to sent it stable too as it is likely a bit too late for 3.12 RC.
regards
Antti
--
http://palosaari.fi/
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: new high-speed USB
device number 2 using ehci-pci
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: New USB device found,
idVendor=14aa, idProduct=0160
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
loka 30 17:28:09 localhost.localdomain kernel: [31B blob data]
loka 30 17:28:09 localhost.localdomain kernel: [36B blob data]
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: SerialNumber:
0000000000065658
loka 30 17:28:09 localhost.localdomain mtp-probe[3060]: checking bus 2, device
2: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2"
loka 30 17:28:09 localhost.localdomain mtp-probe[3060]: bus: 2, device: 2 was
not an MTP device
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: dvb_usb_v2: found a
'Freecom USB2.0 DVB-T' in warm state
loka 30 17:28:09 localhost.localdomain kernel: usb 2-2: dvb_usb_v2: will pass
the complete MPEG2 transport stream to the software demuxer
loka 30 17:28:09 localhost.localdomain kernel: DVB: registering new adapter
(Freecom USB2.0 DVB-T)
loka 30 17:28:09 localhost.localdomain kernel: BUG: unable to handle kernel
NULL pointer dereference at 0000000000000220
loka 30 17:28:09 localhost.localdomain kernel: IP: [<ffffffffa0002900>]
i2c_register_adapter+0x130/0x390 [i2c_core]
loka 30 17:28:09 localhost.localdomain systemd-udevd[434]: worker [3059]
terminated by signal 9 (Killed)
loka 30 17:28:09 localhost.localdomain systemd-udevd[434]: worker [3059] failed
while handling '/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0'
loka 30 17:28:09 localhost.localdomain kernel: PGD 0
loka 30 17:28:09 localhost.localdomain kernel: Oops: 0000 [#1] SMP
loka 30 17:28:09 localhost.localdomain kernel: Modules linked in:
dvb_usb_rtl28xxu(O+) rtl2830(O) dvb_usb_v2(O) fuse nf_conntrack_netbios_ns
nf_conntrack_broadcast ipt_MAS...p6table_man
loka 30 17:28:09 localhost.localdomain kernel: btusb snd_pcm bluetooth
rc_core(O) microcode nfsd serio_raw edac_core pcspkr k10temp edac_mce_amd r8169
snd_page_alloc rfkill snd_time...
loka 30 17:28:09 localhost.localdomain kernel: CPU: 1 PID: 3059 Comm:
systemd-udevd Tainted: G O 3.12.0-rc2+ #69
loka 30 17:28:09 localhost.localdomain kernel: Hardware name: System
manufacturer System Product Name/M5A78L-M/USB3, BIOS 1503 11/14/2012
loka 30 17:28:09 localhost.localdomain kernel: task: ffff8800cf87ed60 ti:
ffff8800bee5a000 task.ti: ffff8800bee5a000
loka 30 17:28:09 localhost.localdomain kernel: RIP: 0010:[<ffffffffa0002900>]
[<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core]
loka 30 17:28:09 localhost.localdomain kernel: RSP: 0018:ffff8800bee5baa8
EFLAGS: 00010246
loka 30 17:28:09 localhost.localdomain kernel: RAX: 0000000000000000 RBX:
ffff880237066520 RCX: ffff8800cee94da8
loka 30 17:28:09 localhost.localdomain kernel: RDX: ffff8800cee95e88 RSI:
ffff88030971aec8 RDI: ffffffff81c70e60
loka 30 17:28:09 localhost.localdomain kernel: RBP: ffff8800bee5bac8 R08:
ffff8800cee95e88 R09: 0000000000000000
loka 30 17:28:09 localhost.localdomain kernel: R10: 0000000000005457 R11:
0000000000000000 R12: 0000000000000000
loka 30 17:28:09 localhost.localdomain kernel: R13: ffff880237066568 R14:
0000000000000000 R15: ffff880237066520
loka 30 17:28:09 localhost.localdomain kernel: FS: 00007fd41e084880(0000)
GS:ffff88031fc40000(0000) knlGS:0000000000000000
loka 30 17:28:09 localhost.localdomain kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
loka 30 17:28:09 localhost.localdomain kernel: CR2: 0000000000000220 CR3:
00000000b8724000 CR4: 00000000000007e0
loka 30 17:28:09 localhost.localdomain kernel: Stack:
loka 30 17:28:09 localhost.localdomain kernel: ffff880237066520
ffff880237066520 0000000000000009 ffff880237066008
loka 30 17:28:09 localhost.localdomain kernel: ffff8800bee5bae8
ffffffffa0002bbe ffff880237066000 ffff88030a00a0b0
loka 30 17:28:09 localhost.localdomain kernel: ffff8800bee5bb28
ffffffffa067e3ed 00ff88030a00a000 ffff88030a00a420
loka 30 17:28:09 localhost.localdomain kernel: Call Trace:
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa0002bbe>]
i2c_add_adapter+0x5e/0x70 [i2c_core]
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa067e3ed>]
rtl2830_attach+0x11d/0xd30 [rtl2830]
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa068f345>]
rtl2831u_frontend_attach+0xc5/0x1c0 [dvb_usb_rtl28xxu]
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa0686807>]
dvb_usbv2_probe+0x607/0x1160 [dvb_usb_v2]
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff814058a8>] ?
__pm_runtime_set_status+0x128/0x1f0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff81476a94>]
usb_probe_interface+0x1c4/0x2f0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f9387>]
driver_probe_device+0x87/0x390
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f9763>]
__driver_attach+0x93/0xa0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f96d0>] ?
__device_attach+0x40/0x40
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f7243>]
bus_for_each_dev+0x63/0xa0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f8dde>]
driver_attach+0x1e/0x20
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f8950>]
bus_add_driver+0x200/0x2d0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff813f9d94>]
driver_register+0x64/0xf0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff81475281>]
usb_register_driver+0x81/0x160
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa0698000>] ?
0xffffffffa0697fff
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffffa069801e>]
rtl28xxu_usb_driver_init+0x1e/0x1000 [dvb_usb_rtl28xxu]
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff810020fa>]
do_one_initcall+0xfa/0x1b0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff81053523>] ?
set_memory_nx+0x43/0x50
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff810d374d>]
load_module+0x1b9d/0x2640
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff810cf9b0>] ?
store_uevent+0x40/0x40
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff810d4366>]
SyS_finit_module+0x86/0xb0
loka 30 17:28:09 localhost.localdomain kernel: [<ffffffff816659a9>]
system_call_fastpath+0x16/0x1b
loka 30 17:28:09 localhost.localdomain kernel: Code: df 01 00 00 48 81 fa 60 02
00 a0 0f 84 fa 01 00 00 48 83 78 10 00 0f 84 9f 01 00 00 48 83 78 08 00 0f 84
94 01 00 00 4...4 24 00 00
loka 30 17:28:09 localhost.localdomain kernel: RIP [<ffffffffa0002900>]
i2c_register_adapter+0x130/0x390 [i2c_core]
loka 30 17:28:09 localhost.localdomain kernel: RSP <ffff8800bee5baa8>
loka 30 17:28:09 localhost.localdomain kernel: CR2: 0000000000000220
loka 30 17:28:09 localhost.localdomain kernel: ---[ end trace fb79592d1bc9e92c
]---
loka 30 17:28:10 localhost.localdomain kernel: usb 2-2: USB disconnect, device
number 2
