Hi Mauro,
On Thu, Sep 26, 2013 at 01:51:57PM -0300, Mauro Carvalho Chehab wrote:
> The difference between your patch and the applied one is:
>
> diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c
> b/drivers/media/pci/cx23885/cx23885-dvb.c
> index 971e4ff..8ed7b94 100644
> --- a/drivers/media/pci/cx23885/cx23885-dvb.c
> +++ b/drivers/media/pci/cx23885/cx23885-dvb.c
> @@ -1055,7 +1055,6 @@ static int dvb_register(struct cx23885_tsport *port)
> &tevii_ts2020_config, &i2c_bus->i2c_adap);
> fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
> }
> -
> break;
> case CX23885_BOARD_DVBWORLD_2005:
> i2c_bus = &dev->i2c_bus[1];
> @@ -1285,6 +1284,7 @@ static int dvb_register(struct cx23885_tsport *port)
> if (fe0->dvb.frontend != NULL) {
> dvb_attach(ts2020_attach, fe0->dvb.frontend,
> &tevii_ts2020_config, &i2c_bus->i2c_adap);
> + fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
> }
> break;
> case CX23885_BOARD_PROF_8000:
>
>
> So, basically, on our patch, you're also filling ops.set_voltage.
>
> As I don't know the board details, I can't tell if this is required or
> not.
>
> Christian/Johannes,
>
> Could you please double-check it? If this is needed, please send me a new
> patch, rebased on the top of linux-media git tree.
no, setting the voltage via dvb.frontend->ops.set_voltage is not needed for
the TeVii S471. See also the patch that introduced S471 support:
https://linuxtv.org/patch/11189/.
Best regards
Johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
