Implement i2c_board_info.platform_data handling in the driver so we can
make device specific changes to the chips we support.
Signed-off-by: Jon Arne Jørgensen <jona...@jonarne.no>
---
drivers/media/i2c/saa7115.c | 62 +++++++++++++++++++++++--
include/media/saa7115.h | 109 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 166 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index ccfaac9..8e915c7 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -228,7 +228,7 @@ static const unsigned char saa7113_init[] = {
R_05_INPUT_CNTL_4, 0x00,
R_06_H_SYNC_START, 0xe9,
R_07_H_SYNC_STOP, 0x0d,
- R_08_SYNC_CNTL, 0x98,
+ R_08_SYNC_CNTL, SAA7113_R08_DEFAULT,
R_09_LUMA_CNTL, 0x01,
R_0A_LUMA_BRIGHT_CNTL, 0x80,
R_0B_LUMA_CONTRAST_CNTL, 0x47,
@@ -236,11 +236,10 @@ static const unsigned char saa7113_init[] = {
R_0D_CHROMA_HUE_CNTL, 0x00,
R_0E_CHROMA_CNTL_1, 0x01,
R_0F_CHROMA_GAIN_CNTL, 0x2a,
- R_10_CHROMA_CNTL_2, 0x00,
+ R_10_CHROMA_CNTL_2, SAA7113_R10_DEFAULT,
R_11_MODE_DELAY_CNTL, 0x0c,
- R_12_RT_SIGNAL_CNTL, 0x01,
- R_13_RT_X_PORT_OUT_CNTL, 0x00,
- R_14_ANAL_ADC_COMPAT_CNTL, 0x00, /* RESERVED */
+ R_12_RT_SIGNAL_CNTL, SAA7113_R12_DEFAULT,
+ R_13_RT_X_PORT_OUT_CNTL, SAA7113_R13_DEFAULT,
R_15_VGATE_START_FID_CHG, 0x00,
R_16_VGATE_STOP, 0x00,
R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
@@ -1583,6 +1582,53 @@ static const struct v4l2_subdev_ops saa711x_ops = {
/* ----------------------------------------------------------------------- */
+static void saa7115_load_platform_data(struct saa711x_state *state,
+ struct saa7115_platform_data *data)
+{
+ struct v4l2_subdev *sd = &state->sd;
+ u8 work;
+
+ switch (state->ident) {
+ case V4L2_IDENT_GM7113C:
+ if (data->saa7113_r08_htc !=
+ (SAA7113_R08_DEFAULT & SAA7113_R08_HTC_MASK)) {
+ work = saa711x_read(sd, R_08_SYNC_CNTL);
+ saa711x_write(sd, R_08_SYNC_CNTL, (work & 0xe7) |
+ (data->saa7113_r08_htc << 3));
+ }
+ if (data->saa7113_r10_ofts !=
+ (SAA7113_R10_DEFAULT & SAA7113_R10_OFTS_MASK)) {
+ work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+ saa711x_write(sd, R_10_CHROMA_CNTL_2, (work & 0x3f) |
+ (data->saa7113_r10_ofts << 6));
+ }
+ if (data->saa7113_r10_vrln !=
+ (SAA7113_R10_DEFAULT & SAA7113_R10_VRLN_MASK)) {
+ work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
+ saa711x_write(sd, R_10_CHROMA_CNTL_2, (work & 0xf7) |
+ (1 << 3));
+ }
+ if (data->saa7113_r12_rts0 !=
+ (SAA7113_R12_DEFAULT & SAA7113_R12_RTS0_MASK)) {
+ work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+ saa711x_write(sd, R_12_RT_SIGNAL_CNTL, (work & 0xf0) |
+ data->saa7113_r12_rts0);
+ }
+ if (data->saa7113_r12_rts1 !=
+ (SAA7113_R12_DEFAULT & SAA7113_R12_RTS1_MASK)) {
+ work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
+ saa711x_write(sd, R_12_RT_SIGNAL_CNTL, (work & 0x0f) |
+ (data->saa7113_r12_rts1 << 4));
+ }
+ if (data->saa7113_r13_adlsb !=
+ (SAA7113_R13_DEFAULT & SAA7113_R13_ADLSB_MASK)) {
+ work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
+ saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL,
+ (work & 0x7f) | (1 << 7));
+ }
+ }
+}
+
/**
* saa711x_detect_chip - Detects the saa711x (or clone) variant
* @client: I2C client structure.
@@ -1769,6 +1815,12 @@ static int saa711x_probe(struct i2c_client *client,
}
if (state->ident > V4L2_IDENT_SAA7111A)
saa711x_writeregs(sd, saa7115_init_misc);
+
+ if (client->dev.platform_data) {
+ struct saa7115_platform_data *data = client->dev.platform_data;
+ saa7115_load_platform_data(state, data);
+ }
+
saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
v4l2_ctrl_handler_setup(hdl);
diff --git a/include/media/saa7115.h b/include/media/saa7115.h
index 4079186..7bb4a11 100644
--- a/include/media/saa7115.h
+++ b/include/media/saa7115.h
@@ -64,5 +64,114 @@
#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5
only */
#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only
*/
+/* SAA7113 (and GM7113) Register settings */
+/* Vertical noise reduction */
+#define SAA7113_R08_VNOI_NORMAL (0x0 << 0)
+#define SAA7113_R08_VNOI_FAST (0x1 << 0)
+#define SAA7113_R08_VNOI_FREE (0x2 << 0) /* NOTE: AUFD must be disabled */
+#define SAA7113_R08_VNOI_BYPS (0x3 << 0)
+/* Horizontal PLL */
+#define SAA7113_R08_PLL_CLOSED (0x0 << 2)
+#define SAA7113_R08_PLL_OPEN (0x1 << 2) /* Horizontal freq. fixed */
+/* Horizontal time constant */
+#define SAA7113_R08_HTC_TV (0x0 << 3)
+#define SAA7113_R08_HTC_VTR (0x1 << 3)
+#define SAA7113_R08_HTC_FLM (0x3 << 3) /* Fast locking mode */
+#define SAA7113_R08_HTC_MASK (0x3 << 3)
+/* Forced ODD/EVEN toggle FOET */
+#define SAA7113_R08_FOET_INTERLACED (0x0 << 5)
+#define SAA7113_R08_FOET_FORCE (0x1 << 5)
+/* Field selection FSEL */
+#define SAA7113_R08_FSEL_50HZ_625 (0x0 << 6)
+#define SAA7113_R08_FSEL_60HZ_525 (0x1 << 6)
+/* Automatic field detection AUFD */
+#define SAA7113_R08_AUFD_DISABLE (0x0 << 7)
+#define SAA7113_R08_AUFD_ENABLE (0x1 << 7)
+
+/* Luminance delay compensation */
+#define SAA7113_R10_YDEL_MASK 0x7
+/* VRLN Pulse position and length */
+#define SAA7113_R10_VRLN_240_286 (0x0 << 3)
+#define SAA7113_R10_VRLN_242_288 (0x1 << 3)
+#define SAA7113_R10_VRLN_MASK (0x1 << 3)
+/* Fine position of HS */
+#define SAA7113_R10_HDEL_MASK (0x3 << 4)
+/* Output format selection */
+#define SAA7113_R10_OFTS_ITU656 (0x0 << 6)
+#define SAA7113_R10_OFTS_VREF (0x1 << 6)
+#define SAA7113_R10_OFTS_DATA_TYPE (0x2 << 6)
+#define SAA7113_R10_OFTS_MASK (0x3 << 6)
+
+/* RTS0/1 Output control */
+#define SAA7113_R12_RTS0_ADC_LSB (0x1 << 0)
+#define SAA7113_R12_RTS0_GPSW0 (0x2 << 0)
+#define SAA7113_R12_RTS0_HL (0x3 << 0)
+#define SAA7113_R12_RTS0_VL (0x4 << 0)
+#define SAA7113_R12_RTS0_DL (0x5 << 0)
+#define SAA7113_R12_RTS0_PLIN (0x6 << 0)
+#define SAA7113_R12_RTS0_HREF_HS (0x7 << 0)
+#define SAA7113_R12_RTS0_HS (0x8 << 0)
+#define SAA7113_R12_RTS0_HQ (0x9 << 0)
+#define SAA7113_R12_RTS0_ODD (0xa << 0)
+#define SAA7113_R12_RTS0_VS (0xb << 0)
+#define SAA7113_R12_RTS0_V123 (0xc << 0)
+#define SAA7113_R12_RTS0_VGATE (0xd << 0)
+#define SAA7113_R12_RTS0_VREF (0xe << 0)
+#define SAA7113_R12_RTS0_FID (0xf << 0)
+#define SAA7113_R12_RTS0_MASK (0xf << 0)
+#define SAA7113_R12_RTS1_ADC_LSB (0x1 << 4)
+#define SAA7113_R12_RTS1_GPSW1 (0x2 << 4)
+#define SAA7113_R12_RTS1_HL (0x3 << 4)
+#define SAA7113_R12_RTS1_VL (0x4 << 4)
+#define SAA7113_R12_RTS1_DL (0x5 << 4)
+#define SAA7113_R12_RTS1_PLIN (0x6 << 4)
+#define SAA7113_R12_RTS1_HREF_HS (0x7 << 4)
+#define SAA7113_R12_RTS1_HS (0x8 << 4)
+#define SAA7113_R12_RTS1_HQ (0x9 << 4)
+#define SAA7113_R12_RTS1_ODD (0xa << 4)
+#define SAA7113_R12_RTS1_VS (0xb << 4)
+#define SAA7113_R12_RTS1_V123 (0xc << 4)
+#define SAA7113_R12_RTS1_VGATE (0xd << 4)
+#define SAA7113_R12_RTS1_VREF (0xe << 4)
+#define SAA7113_R12_RTS1_FID (0xf << 4)
+#define SAA7113_R12_RTS1_MASK (0xf << 4)
+
+/* Analog test select */
+#define SAA7113_R13_AOSL_ITP1 (0x0 << 0)
+#define SAA7113_R13_AOSL_AD1 (0x1 << 0)
+#define SAA7113_R13_AOSL_AD2 (0x2 << 0)
+#define SAA7113_R13_AOSL_ITP2 (0x3 << 0)
+/* Field ID polarity */
+#define SAA7113_R13_FIDP_DEFAULT (0x0 << 3)
+#define SAA7113_R13_FIDP_INVERTED (0x1 << 3)
+/* Status byte functionality */
+#define SAA7113_R13_OLDSB_DEFAUL (0x0 << 4)
+#define SAA7113_R13_OLDSB_COMPAT (0x1 << 4)
+/* Analog-to-digital converter output bits on VPO7 to VPO0 in bypass mode */
+#define SAA7113_R13_ADLSB_MSB (0x0 << 7)
+#define SAA7113_R13_ADLSB_LSB (0x1 << 7)
+#define SAA7113_R13_ADLSB_MASK (0x1 << 7)
+
+
+/* Defaults according to datasheet */
+#define SAA7113_R08_DEFAULT (SAA7113_R08_AUFD_ENABLE | \
+ SAA7113_R08_HTC_FLM)
+#define SAA7113_R10_DEFAULT 0x0
+#define SAA7113_R12_DEFAULT SAA7113_R12_RTS0_ADC_LSB
+#define SAA7113_R13_DEFAULT 0x0
+
+struct saa7115_platform_data {
+ /* Horizontal time constant */
+ u8 saa7113_r08_htc;
+
+ u8 saa7113_r10_vrln;
+ u8 saa7113_r10_ofts;
+
+ u8 saa7113_r12_rts0;
+ u8 saa7113_r12_rts1;
+
+ u8 saa7113_r13_adlsb;
+};
+
#endif
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
