Hi Mauro, thanks a lot for taking the time to respond to my issue! > Did it used to work with a previous version? If so, could you please > bisect to see what patch broke it? No, it also didn't work with the previous version, but since building the previous version was also a bit of a hassle, I am not so sure I got a clean module.
> I'm not familiar enough with ARM to understand what the above actually means. > I would be expecting, instead, an error with the trace function stack. > > Perhaps you need to enable some things at .config to enable it, or to run > ./scripts/ksymoops manually to translate the above into something useful. I only know the ksmoops way. Since I just read that you published a new version, I will try the new version and apply ksmoops there if necessary (hopefully not! :-)) > > I heard that using a 2A power adapter would work, but I don't have it > currently (I'm currently trying to get one). I tested also with an USB > hub with its own power supply. I found there two issues: > > - the hub was sending power also to the Rpi, causing problems > there due to the other power adapter; > > - the hub I used seemed to interfere at the USB isoc traffic. > > What I'm trying to say is that perhaps this is not a driver issue at all, > but, instead, a problem with em28xx+demod high power consumption and Rpi. Sad to say, but I am using a 2A USB power adapter already. I also tried to it with a powered hub (yeah, that powered the pi as well - as you mentioned) but same oops-results. There is one other possibility. An RTL8192CU-WiFi-Module is also connected to the pi. Maybe it interferes? I will check that out as well. > The best way is to test the device first on a x86, to be sure that the > driver is OK there. Then, you need to properly address the power supply > needs for RPi. Only after that, check if are there at em28xx anything > that could be incompatible with arm. Will do! Cheers, Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
