MultiPLP filtering support for CXD2820r, not tested. Somebody from Russia please test (exclude Moscow, because used singlePLP). Usual used PLP 0 (4TV + 3 radio) and 1 (4TV). PLP 2,3 reserved (regional channels).
P.S. You can use my scan-s2 with multistream support - https://bitbucket.org/CrazyCat/scan-s2. Generated channel list compatible with current VDR 1.7.3x Signed-off-by: Evgeny Plehov <evgenyple...@ukr.net> diff --git a/drivers/media/dvb-frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c index 9b658c1..7ca5c69 100644 --- a/drivers/media/dvb-frontends/cxd2820r_core.c +++ b/drivers/media/dvb-frontends/cxd2820r_core.c @@ -660,7 +660,8 @@ static const struct dvb_frontend_ops cxd2820r_ops = { FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO | FE_CAN_MUTE_TS | - FE_CAN_2G_MODULATION + FE_CAN_2G_MODULATION | + FE_CAN_MULTISTREAM }, .release = cxd2820r_release, diff --git a/drivers/media/dvb-frontends/cxd2820r_t2.c b/drivers/media/dvb-frontends/cxd2820r_t2.c index e82d82a..c2bfea7 100644 --- a/drivers/media/dvb-frontends/cxd2820r_t2.c +++ b/drivers/media/dvb-frontends/cxd2820r_t2.c @@ -124,6 +124,23 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe) buf[1] = ((if_ctl >> 8) & 0xff); buf[2] = ((if_ctl >> 0) & 0xff); + /* PLP filtering */ + if (c->stream_id < 0 || c->stream_id > 255) { + dev_dbg(&priv->i2c->dev, "%s: Disable PLP filtering\n", __func__); + ret = cxd2820r_wr_reg(priv, 0x023ad , 0); + if (ret) + goto error; + } else { + dev_dbg(&priv->i2c->dev, "%s: Enable PLP filtering = %d\n", __func__, + c->stream_id); + ret = cxd2820r_wr_reg(priv, 0x023af , c->stream_id & 0xFF); + if (ret) + goto error; + ret = cxd2820r_wr_reg(priv, 0x023ad , 1); + if (ret) + goto error; + } + ret = cxd2820r_wr_regs(priv, 0x020b6, buf, 3); if (ret) goto error; -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
