Thanks! I will try it with your patches!
Regards Jan -----Ursprüngliche Nachricht----- Von: linux-media-ow...@vger.kernel.org [mailto:linux-media-ow...@vger.kernel.org] Im Auftrag von Hans Verkuil Gesendet: Montag, 21. Januar 2013 10:54 An: Jan Stumpf Cc: linux-media@vger.kernel.org Betreff: Re: [cx231xx] Support for Arm / Omap working at all? On Thu January 17 2013 08:31:50 Jan Stumpf wrote: > Hi! > > I'm trying to get an Hauppauge Live Usb 2 video grabber to run on on Omap4 > (Gumstix Duovero). I'm using Sakomans omap-3.6 head kernel sources from > http://git.sakoman.com/git/gitweb.cgi?p=linux.git;a=summary . The hardware is > successfully detected on the USB host port, the driver loads perfectly > including the firmware. With v4l2-ctl --all I can see if thee video signal on > the composite port is ok or if the sync is lost, but as soon as I use any > v4l2 software (e.g. yavta) to grab some images the driver uses 100% of the > cpu, returns the first image and after some seconds I see EPROTO (-71) errors > in dmesg. First I get " cx231xx #0: can't change interface 3 alt. no to 0 > (err=-71)" and then "UsbInterface::sendCommand, failed with status --71" > > I did the following tests: > > - checked that all patches I found (e.g from > http://git.linuxtv.org/mchehab/cx231xx.git) are included in my kernel, > including the URB DMA related patches and the timing patches > - tried the same on an Gumstix Overo (Overo Fire and Overo WarerStorm) on > several different header boards. > - tried older kernels (3.2 and 2.6.32) with rougly the same results or > known errors due to missing patches > > Unfortunately I can't use other capture devices because the final hardware is > custom made with the cx23102 chip :-( I could use an omap3 instead of an > omap4, but omap4 is preferred. > > My questions are: > > - Did anybody ever used the cx231xx driver with an omap3 or omap4 > successfully? I'm pretty sure the answer is that you're the first to try it. > - If yes, could you let me know the kernel version and maybe the config? > - Any hints what I could try? I'm an expirienced embedded C programmer but I > dont have much expirience in USB kernel drivers. A few months back I was working on improving this driver and I made a number of fixes that are available in my git tree: http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx In particular this patch might be relevant: http://git.linuxtv.org/hverkuil/media_tree.git/commit/7bcf29cf460569c523b15d3c0dfed1397a7b770e Regards, Hans > > Any help is greatly appriciated! > > Thanks in Advance! > > Jan-- > To unsubscribe from this list: send the line "unsubscribe linux-media" > in the body of a message to majord...@vger.kernel.org More majordomo > info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
