No functional changes here. Just re-organizes the functions
inside the file.
Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
---
drivers/media/dvb-frontends/mb86a20s.c | 223 +++++++++++++++++----------------
1 file changed, 118 insertions(+), 105 deletions(-)
diff --git a/drivers/media/dvb-frontends/mb86a20s.c
b/drivers/media/dvb-frontends/mb86a20s.c
index a0c9f41..526660a 100644
--- a/drivers/media/dvb-frontends/mb86a20s.c
+++ b/drivers/media/dvb-frontends/mb86a20s.c
@@ -194,6 +194,10 @@ static struct regdata mb86a20s_clear_stats[] = {
{ 0x51, 0x01 },
};
+/*
+ * I2C read/write functions and macros
+ */
+
static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
u8 i2c_addr, int reg, int data)
{
@@ -255,45 +259,42 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state
*state,
mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
regdata, ARRAY_SIZE(regdata))
-static int mb86a20s_initfe(struct dvb_frontend *fe)
+/*
+ * Ancillary internal routines (likely compiled inlined)
+ *
+ * The functions below assume that gateway lock has already obtained
+ */
+
+static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct mb86a20s_state *state = fe->demodulator_priv;
- int rc;
- u8 regD5 = 1;
+ int val;
dprintk("\n");
+ *status = 0;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
+ val = mb86a20s_readreg(state, 0x0a) & 0xf;
+ if (val < 0)
+ return val;
- /* Initialize the frontend */
- rc = mb86a20s_writeregdata(state, mb86a20s_init);
- if (rc < 0)
- goto err;
+ if (val >= 2)
+ *status |= FE_HAS_SIGNAL;
- if (!state->config->is_serial) {
- regD5 &= ~1;
+ if (val >= 4)
+ *status |= FE_HAS_CARRIER;
- rc = mb86a20s_writereg(state, 0x50, 0xd5);
- if (rc < 0)
- goto err;
- rc = mb86a20s_writereg(state, 0x51, regD5);
- if (rc < 0)
- goto err;
- }
+ if (val >= 5)
+ *status |= FE_HAS_VITERBI;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
+ if (val >= 7)
+ *status |= FE_HAS_SYNC;
-err:
- if (rc < 0) {
- state->need_init = true;
- printk(KERN_INFO "mb86a20s: Init failed. Will try again
later\n");
- } else {
- state->need_init = false;
- dprintk("Initialization succeeded.\n");
- }
- return rc;
+ if (val >= 8) /* Maybe 9? */
+ *status |= FE_HAS_LOCK;
+
+ dprintk("val = %d, status = 0x%02x\n", val, *status);
+
+ return 0;
}
static int mb86a20s_read_signal_strength(struct dvb_frontend *fe)
@@ -340,82 +341,6 @@ static int mb86a20s_read_signal_strength(struct
dvb_frontend *fe)
return 0;
}
-static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
- struct mb86a20s_state *state = fe->demodulator_priv;
- int val;
-
- dprintk("\n");
- *status = 0;
-
- val = mb86a20s_readreg(state, 0x0a) & 0xf;
- if (val < 0)
- return val;
-
- if (val >= 2)
- *status |= FE_HAS_SIGNAL;
-
- if (val >= 4)
- *status |= FE_HAS_CARRIER;
-
- if (val >= 5)
- *status |= FE_HAS_VITERBI;
-
- if (val >= 7)
- *status |= FE_HAS_SYNC;
-
- if (val >= 8) /* Maybe 9? */
- *status |= FE_HAS_LOCK;
-
- dprintk("val = %d, status = 0x%02x\n", val, *status);
-
- return 0;
-}
-
-static int mb86a20s_reset_counters(struct dvb_frontend *fe);
-
-static int mb86a20s_set_frontend(struct dvb_frontend *fe)
-{
- struct mb86a20s_state *state = fe->demodulator_priv;
- int rc;
-#if 0
- /*
- * FIXME: Properly implement the set frontend properties
- */
- struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-#endif
-
- dprintk("\n");
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- dprintk("Calling tuner set parameters\n");
- fe->ops.tuner_ops.set_params(fe);
-
- /*
- * Make it more reliable: if, for some reason, the initial
- * device initialization doesn't happen, initialize it when
- * a SBTVD parameters are adjusted.
- *
- * Unfortunately, due to a hard to track bug at tda829x/tda18271,
- * the agc callback logic is not called during DVB attach time,
- * causing mb86a20s to not be initialized with Kworld SBTVD.
- * So, this hack is needed, in order to make Kworld SBTVD to work.
- */
- if (state->need_init)
- mb86a20s_initfe(fe);
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 0);
- rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
-
- mb86a20s_reset_counters(fe);
-
- return rc;
-}
-
static int mb86a20s_get_modulation(struct mb86a20s_state *state,
unsigned layer)
{
@@ -868,6 +793,94 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe)
return rc;
}
+/*
+ * The functions below are called via DVB callbacks, so they need to
+ * properly use the I2C gate control
+ */
+
+static int mb86a20s_initfe(struct dvb_frontend *fe)
+{
+ struct mb86a20s_state *state = fe->demodulator_priv;
+ int rc;
+ u8 regD5 = 1;
+
+ dprintk("\n");
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ /* Initialize the frontend */
+ rc = mb86a20s_writeregdata(state, mb86a20s_init);
+ if (rc < 0)
+ goto err;
+
+ if (!state->config->is_serial) {
+ regD5 &= ~1;
+
+ rc = mb86a20s_writereg(state, 0x50, 0xd5);
+ if (rc < 0)
+ goto err;
+ rc = mb86a20s_writereg(state, 0x51, regD5);
+ if (rc < 0)
+ goto err;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+err:
+ if (rc < 0) {
+ state->need_init = true;
+ printk(KERN_INFO "mb86a20s: Init failed. Will try again
later\n");
+ } else {
+ state->need_init = false;
+ dprintk("Initialization succeeded.\n");
+ }
+ return rc;
+}
+
+static int mb86a20s_set_frontend(struct dvb_frontend *fe)
+{
+ struct mb86a20s_state *state = fe->demodulator_priv;
+ int rc;
+#if 0
+ /*
+ * FIXME: Properly implement the set frontend properties
+ */
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+#endif
+
+ dprintk("\n");
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ dprintk("Calling tuner set parameters\n");
+ fe->ops.tuner_ops.set_params(fe);
+
+ /*
+ * Make it more reliable: if, for some reason, the initial
+ * device initialization doesn't happen, initialize it when
+ * a SBTVD parameters are adjusted.
+ *
+ * Unfortunately, due to a hard to track bug at tda829x/tda18271,
+ * the agc callback logic is not called during DVB attach time,
+ * causing mb86a20s to not be initialized with Kworld SBTVD.
+ * So, this hack is needed, in order to make Kworld SBTVD to work.
+ */
+ if (state->need_init)
+ mb86a20s_initfe(fe);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ mb86a20s_reset_counters(fe);
+
+ return rc;
+}
+
static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe,
fe_status_t *status)
{
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
