Before dvb_pll_attch call, be sure that drxd demodulator was
initialized, otherwise, dvb_pll_attach() will always failed.
In dvb_pll_attach(), first thing done is to enable the I2C gate
control in order to probe the pll by performing a read access.
As demodulator was not initialized, every i2c access failed.
Reported-by: frederic.mantega...@gbiloba.org
Signed-off-by: Patrice Chotard <patricechot...@free.fr>
---
drivers/media/pci/ngene/ngene-cards.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/pci/ngene/ngene-cards.c
b/drivers/media/pci/ngene/ngene-cards.c
index 96a13ed..e2192db 100644
--- a/drivers/media/pci/ngene/ngene-cards.c
+++ b/drivers/media/pci/ngene/ngene-cards.c
@@ -328,6 +328,8 @@ static int demod_attach_drxd(struct ngene_channel *chan)
return -ENODEV;
}
+ /* initialized the DRXD demodulator */
+ chan->fe->ops.init(chan->fe);
if (!dvb_attach(dvb_pll_attach, chan->fe, feconf->pll_address,
&chan->i2c_adapter,
feconf->pll_type)) {
-- 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
