Hi, Guennadi Thanks for your review!
>-----Original Message----- >From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de] >Sent: Tuesday, 27 November, 2012 18:57 >To: Albert Wang >Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang >Subject: Re: [PATCH 04/15] [media] marvell-ccic: reset ccic phy when stop >streaming for >stability > >On Fri, 23 Nov 2012, Albert Wang wrote: > >> From: Libin Yang <lby...@marvell.com> >> >> This patch adds the reset ccic phy operation when stop streaming. >> >> Without reset ccic phy, the next start streaming may be unstable. >> >> Also need add CCIC2 definition when PXA688/PXA2128 support dual ccics. >> >> Signed-off-by: Albert Wang <twan...@marvell.com> >> Signed-off-by: Libin Yang <lby...@marvell.com> >> --- >> drivers/media/platform/marvell-ccic/mcam-core.c | 5 +++++ >> drivers/media/platform/marvell-ccic/mcam-core.h | 2 ++ >> drivers/media/platform/marvell-ccic/mmp-driver.c | 25 >> ++++++++++++++++++++++ >> 3 files changed, 32 insertions(+) >> >> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c >> b/drivers/media/platform/marvell-ccic/mcam-core.c >> index b111f0d..760e8ea 100755 >> --- a/drivers/media/platform/marvell-ccic/mcam-core.c >> +++ b/drivers/media/platform/marvell-ccic/mcam-core.c >> @@ -1053,6 +1053,11 @@ static int mcam_vb_stop_streaming(struct vb2_queue >> *vq) >> return -EINVAL; >> mcam_ctlr_stop_dma(cam); >> /* >> + * Reset the CCIC PHY after stopping streaming, >> + * otherwise, the CCIC may be unstable. >> + */ >> + cam->ctlr_reset(cam); > >Aren't you breaking the cafe driver by calling .ctrl_reset() without checking >for NULL? Same >holds for your .calc_dphy() callback too. > Sorry, it's our mistake. We will fix it soon. >> + /* >> * VB2 reclaims the buffers, so we need to forget >> * about them. >> */ >> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h >> b/drivers/media/platform/marvell-ccic/mcam-core.h >> index 0df6b1c..40368f6 100755 >> --- a/drivers/media/platform/marvell-ccic/mcam-core.h >> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h >> @@ -103,6 +103,7 @@ struct mcam_camera { >> short int use_smbus; /* SMBUS or straight I2c? */ >> enum mcam_buffer_mode buffer_mode; >> >> + int ccic_id; >> /* MIPI support */ >> int bus_type; >> int (*dphy)[3]; >> @@ -119,6 +120,7 @@ struct mcam_camera { >> void (*plat_power_up) (struct mcam_camera *cam); >> void (*plat_power_down) (struct mcam_camera *cam); >> void (*calc_dphy)(struct mcam_camera *cam); >> + void (*ctlr_reset)(struct mcam_camera *cam); >> >> /* >> * Everything below here is private to the mcam core and diff --git >> a/drivers/media/platform/marvell-ccic/mmp-driver.c >> b/drivers/media/platform/marvell-ccic/mmp-driver.c >> index 80977b0..20046d0 100755 >> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c >> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c >> @@ -103,6 +103,7 @@ static struct mmp_camera *mmpcam_find_device(struct >platform_device *pdev) >> #define CPU_SUBSYS_PMU_BASE 0xd4282800 >> #define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg >> */ >> #define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg >> */ >> +#define REG_CCIC2_CRCR 0xf4 /* CCIC2 clk reset ctrl reg >> */ >> >> static void mcam_clk_set(struct mcam_camera *mcam, int on) { @@ >> -174,6 +175,28 @@ static void mmpcam_power_down(struct mcam_camera *mcam) >> mcam_clk_set(mcam, 0); >> } >> >> +void mcam_ctlr_reset(struct mcam_camera *mcam) { >> + unsigned long val; >> + struct mmp_camera *cam = mcam_to_cam(mcam); >> + >> + if (mcam->ccic_id) { >> + /* >> + * Using CCIC2 >> + */ >> + val = ioread32(cam->power_regs + REG_CCIC2_CRCR); >> + iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR); >> + iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR); >> + } else { >> + /* >> + * Using CCIC1 >> + */ >> + val = ioread32(cam->power_regs + REG_CCIC_CRCR); >> + iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR); >> + iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR); >> + } >> +} >> + >> /* >> * calc the dphy register values >> * There are three dphy registers being used. >> @@ -301,9 +324,11 @@ static int mmpcam_probe(struct platform_device *pdev) >> mcam = &cam->mcam; >> mcam->plat_power_up = mmpcam_power_up; >> mcam->plat_power_down = mmpcam_power_down; >> + mcam->ctlr_reset = mcam_ctlr_reset; >> mcam->calc_dphy = mmpcam_calc_dphy; >> mcam->dev = &pdev->dev; >> mcam->use_smbus = 0; >> + mcam->ccic_id = pdev->id; >> mcam->bus_type = pdata->bus_type; >> mcam->dphy = &(pdata->dphy); >> mcam->mipi_enabled = 0; >> -- >> 1.7.9.5 > >Thanks >Guennadi >--- >Guennadi Liakhovetski, Ph.D. >Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
