Hi, Guennadi We will update it soon.
>-----Original Message----- >From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de] >Sent: Tuesday, 27 November, 2012 18:50 >To: Albert Wang >Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang >Subject: Re: [PATCH 03/15] [media] marvell-ccic: add clock tree support for >marvell-ccic >driver > >On Fri, 23 Nov 2012, Albert Wang wrote: > >> From: Libin Yang <lby...@marvell.com> >> >> This patch adds the clock tree support for marvell-ccic. >> >> Each board may require different clk enabling sequence. >> Developer need add the clk_name in correct sequence in board driver to >> use this feature. >> >> Signed-off-by: Libin Yang <lby...@marvell.com> >> Signed-off-by: Albert Wang <twan...@marvell.com> >> --- >> drivers/media/platform/marvell-ccic/mcam-core.h | 6 +++ >> drivers/media/platform/marvell-ccic/mmp-driver.c | 57 >> ++++++++++++++++++++++ >> include/media/mmp-camera.h | 5 ++ >> 3 files changed, 68 insertions(+) >> >> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h >> b/drivers/media/platform/marvell-ccic/mcam-core.h >> index 2d444a1..0df6b1c 100755 >> --- a/drivers/media/platform/marvell-ccic/mcam-core.h >> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h >> @@ -88,6 +88,7 @@ struct mmp_frame_state { >> * the dev_lock spinlock; they are marked as such by comments. >> * dev_lock is also required for access to device registers. >> */ >> +#define NR_MCAM_CLK 4 >> struct mcam_camera { >> /* >> * These fields should be set by the platform code prior to @@ >> -107,6 +108,11 @@ struct mcam_camera { >> int (*dphy)[3]; >> int mipi_enabled; >> int lane; /* lane number */ >> + >> + /* clock tree support */ >> + struct clk *clk[NR_MCAM_CLK]; >> + int clk_num; >> + >> /* >> * Callbacks from the core to the platform code. >> */ >> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c >> b/drivers/media/platform/marvell-ccic/mmp-driver.c >> index 9d7aa79..80977b0 100755 >> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c >> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c >> @@ -104,6 +104,23 @@ static struct mmp_camera *mmpcam_find_device(struct >platform_device *pdev) >> #define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg >> */ >> #define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg >> */ >> >> +static void mcam_clk_set(struct mcam_camera *mcam, int on) { >> + unsigned int i; >> + >> + if (on) { >> + for (i = 0; i < mcam->clk_num; i++) { >> + if (mcam->clk[i]) > >From your init below, mcam->clk[i] can be a negative error code. > Yes. We will fix it. >> + clk_enable(mcam->clk[i]); >> + } >> + } else { >> + for (i = 0; i < mcam->clk_num; i++) { >> + if (mcam->clk[i]) >> + clk_disable(mcam->clk[i]); >> + } >> + } >> +} >> + >> /* >> * Power control. >> */ >> @@ -134,6 +151,8 @@ static void mmpcam_power_up(struct mcam_camera *mcam) >> mdelay(5); >> gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ >> mdelay(5); >> + >> + mcam_clk_set(mcam, 1); >> } >> >> static void mmpcam_power_down(struct mcam_camera *mcam) @@ -151,6 >> +170,8 @@ static void mmpcam_power_down(struct mcam_camera *mcam) >> pdata = cam->pdev->dev.platform_data; >> gpio_set_value(pdata->sensor_power_gpio, 0); >> gpio_set_value(pdata->sensor_reset_gpio, 0); >> + >> + mcam_clk_set(mcam, 0); >> } >> >> /* >> @@ -229,6 +250,37 @@ static irqreturn_t mmpcam_irq(int irq, void *data) >> return IRQ_RETVAL(handled); >> } >> >> +static void mcam_init_clk(struct mcam_camera *mcam, >> + struct mmp_camera_platform_data *pdata, int init) { >> + unsigned int i; >> + >> + if (NR_MCAM_CLK < pdata->clk_num) { >> + dev_warn(mcam->dev, "Too many mcam clocks defined\n"); >> + mcam->clk_num = 0; >> + return; >> + } >> + >> + if (init) { >> + for (i = 0; i < pdata->clk_num; i++) { >> + if (pdata->clk_name[i] != NULL) >> + mcam->clk[i] = clk_get(mcam->dev, >> + pdata->clk_name[i]); >> + if (IS_ERR(mcam->clk[i])) >> + dev_warn(mcam->dev, "Could not get clk: %s\n", >> + pdata->clk_name[i]); > >You issue a warning but continue initialisation, leaving mcam->clk[i] set to >an error value. > Yes, thanks to point it out. >> + } >> + mcam->clk_num = pdata->clk_num; >> + } else { >> + for (i = 0; i < pdata->clk_num; i++) { >> + if (mcam->clk[i]) { >> + clk_put(mcam->clk[i]); >> + mcam->clk[i] = NULL; >> + } >> + } >> + mcam->clk_num = 0; >> + } >> +} > >Don't think I like this. IIUC, your driver should only try to use clocks, that >it knows about, >not some random clocks, passed from the platform data. So, you should be using >explicit >clock names. In your platform data you can set whether a specific clock should >be used or >not, but not pass clock names down. Also you might want to consider using >devm_clk_get() >and be more careful with error handling. > OK, we will try to enhance it. >> >> static int mmpcam_probe(struct platform_device *pdev) { @@ -290,6 >> +342,8 @@ static int mmpcam_probe(struct platform_device *pdev) >> ret = -ENODEV; >> goto out_unmap1; >> } >> + >> + mcam_init_clk(mcam, pdata, 1); >> /* >> * Find the i2c adapter. This assumes, of course, that the >> * i2c bus is already up and functioning. >> @@ -317,6 +371,7 @@ static int mmpcam_probe(struct platform_device *pdev) >> goto out_gpio; >> } >> gpio_direction_output(pdata->sensor_reset_gpio, 0); >> + >> /* >> * Power the device up and hand it off to the core. >> */ >> @@ -349,6 +404,7 @@ out_gpio2: >> out_gpio: >> gpio_free(pdata->sensor_power_gpio); >> out_unmap2: >> + mcam_init_clk(mcam, pdata, 0); >> iounmap(cam->power_regs); >> out_unmap1: >> iounmap(mcam->regs); >> @@ -372,6 +428,7 @@ static int mmpcam_remove(struct mmp_camera *cam) >> gpio_free(pdata->sensor_power_gpio); >> iounmap(cam->power_regs); >> iounmap(mcam->regs); >> + mcam_init_clk(mcam, pdata, 0); >> kfree(cam); >> return 0; >> } >> diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h >> index a0b034a..e161ae0 100755 >> --- a/include/media/mmp-camera.h >> +++ b/include/media/mmp-camera.h >> @@ -15,4 +15,9 @@ struct mmp_camera_platform_data { >> int mipi_enabled; /* MIPI enabled flag */ >> int lane; /* ccic used lane number; 0 means DVP mode */ >> int lane_clk; >> + /* >> + * clock tree support >> + */ >> + char *clk_name[4]; >> + int clk_num; >> }; >> -- >> 1.7.9.5 > >Thanks >Guennadi >--- >Guennadi Liakhovetski, Ph.D. >Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
