Add PHY routing configuration for both 3430 and 3630. Also add register bit
definitions of CSIRXFE and CAMERA_PHY_CTRL registers on OMAP 3430 and 3630,
respectively.
Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi>
---
drivers/media/platform/omap3isp/ispcsiphy.c | 89 +++++++++++++++++++++++++++
drivers/media/platform/omap3isp/ispreg.h | 22 +++++++
2 files changed, 111 insertions(+), 0 deletions(-)
diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c
b/drivers/media/platform/omap3isp/ispcsiphy.c
index 348f67e..c808b6a 100644
--- a/drivers/media/platform/omap3isp/ispcsiphy.c
+++ b/drivers/media/platform/omap3isp/ispcsiphy.c
@@ -32,6 +32,95 @@
#include "ispreg.h"
#include "ispcsiphy.h"
+static void csiphy_routing_cfg_3630(struct isp_csiphy *phy, u32 iface,
+ bool ccp2_strobe)
+{
+ u32 reg = isp_reg_readl(
+ phy->isp, OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL, 0);
+ u32 shift, mode;
+
+ switch (iface) {
+ case ISP_INTERFACE_CCP2B_PHY1:
+ reg &= ~OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
+ break;
+ case ISP_INTERFACE_CSI2C_PHY1:
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT;
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
+ break;
+ case ISP_INTERFACE_CCP2B_PHY2:
+ reg |= OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2;
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
+ break;
+ case ISP_INTERFACE_CSI2A_PHY2:
+ shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT;
+ mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY;
+ break;
+ }
+
+ /* Select data/clock or data/strobe mode for CCP2 */
+ switch (iface) {
+ case ISP_INTERFACE_CCP2B_PHY1:
+ case ISP_INTERFACE_CCP2B_PHY2:
+ if (ccp2_strobe)
+ mode =
OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE;
+ else
+ mode =
OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK;
+ }
+
+ reg &= ~(OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK << shift);
+ reg |= mode << shift;
+
+ isp_reg_writel(phy->isp, reg,
+ OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL, 0);
+}
+
+static void csiphy_routing_cfg_3430(struct isp_csiphy *phy, u32 iface, bool on,
+ bool ccp2_strobe)
+{
+ u32 csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ
+ | OMAP343X_CONTROL_CSIRXFE_RESET;
+
+ /* Only the CCP2B on PHY1 is configurable. */
+ if (iface != ISP_INTERFACE_CCP2B_PHY1)
+ return;
+
+ if (!on) {
+ isp_reg_writel(phy->isp, 0,
+ OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE, 0);
+ return;
+ }
+
+ if (ccp2_strobe)
+ csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM;
+
+ isp_reg_writel(phy->isp, csirxfe,
+ OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE, 0);
+}
+
+/**
+ * Configure OMAP 3 CSI PHY routing.
+ *
+ * Note that the underlying routing configuration registers are part
+ * of the control (SCM) register space and part of the CORE power
+ * domain on both 3430 and 3630, so they will not hold their contents
+ * in off-mode.
+ *
+ * @phy: relevant phy device
+ * @iface: ISP_INTERFACE_*
+ * @on: power on or off
+ * @ccp2_strobe: false: data/clock, true: data/strobe
+ */
+static void csiphy_routing_cfg(struct isp_csiphy *phy, u32 iface, bool on,
+ bool ccp2_strobe)
+{
+ if (phy->isp->mmio_base[OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL]
+ && on)
+ return csiphy_routing_cfg_3630(phy, iface, ccp2_strobe);
+ if (phy->isp->mmio_base[OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE])
+ return csiphy_routing_cfg_3430(phy, iface, on, ccp2_strobe);
+}
+
/*
* csiphy_lanes_config - Configuration of CSIPHY lanes.
*
diff --git a/drivers/media/platform/omap3isp/ispreg.h
b/drivers/media/platform/omap3isp/ispreg.h
index e2c57f3..148108b 100644
--- a/drivers/media/platform/omap3isp/ispreg.h
+++ b/drivers/media/platform/omap3isp/ispreg.h
@@ -1583,4 +1583,26 @@
#define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_MASK \
(0x7fffff << ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT)
+/*
-----------------------------------------------------------------------------
+ * CONTROL registers for CSI-2 phy routing
+ */
+
+/* OMAP343X_CONTROL_CSIRXFE */
+#define OMAP343X_CONTROL_CSIRXFE_CSIB_INV (1 << 7)
+#define OMAP343X_CONTROL_CSIRXFE_RESENABLE (1 << 8)
+#define OMAP343X_CONTROL_CSIRXFE_SELFORM (1 << 10)
+#define OMAP343X_CONTROL_CSIRXFE_PWRDNZ (1 << 12)
+#define OMAP343X_CONTROL_CSIRXFE_RESET (1 << 13)
+
+/* OMAP3630_CONTROL_CAMERA_PHY_CTRL */
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT 2
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT 0
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY 0x0
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE 0x1
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK 0x2
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_GPI 0x3
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK 0x3
+/* CCP2B: set to receive data from PHY2 instead of PHY1 */
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2 (1 << 4)
+
#endif /* OMAP3_ISP_REG_H */
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
