Em Fri, 17 Aug 2012 04:35:08 +0300
Antti Palosaari <cr...@iki.fi> escreveu:
> Make LNA run-time switching possible for PCTV nanoStick T2 290e!
>
> Signed-off-by: Antti Palosaari <cr...@iki.fi>
> ---
> drivers/media/usb/em28xx/em28xx-dvb.c | 40
> ++++++++++++++++++++++++++++++-----
> 1 file changed, 35 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c
> b/drivers/media/usb/em28xx/em28xx-dvb.c
> index 34c5ea9..75f907a 100644
> --- a/drivers/media/usb/em28xx/em28xx-dvb.c
> +++ b/drivers/media/usb/em28xx/em28xx-dvb.c
> @@ -81,6 +81,7 @@ struct em28xx_dvb {
> int (*gate_ctrl)(struct dvb_frontend *, int);
> struct semaphore pll_mutex;
> bool dont_attach_fe1;
> + int gpio;
Please, don't call it simply as "gpio". There are 12 GPIO pins at em28xx
devices,
used by tuners, demods, IR's, LED's, etc. Instead, you should associate it
with its function. I would call it as "lna_gpio" (or something like that).
> };
>
>
> @@ -568,6 +569,33 @@ static void pctv_520e_init(struct em28xx *dev)
> i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
> };
>
> +static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe, int val)
> +{
> + struct em28xx *dev = fe->dvb->priv;
> +#ifdef CONFIG_GPIOLIB
> + struct em28xx_dvb *dvb = dev->dvb;
> + int ret;
> + unsigned long flags;
> +
> + if (val)
> + flags = GPIOF_OUT_INIT_LOW;
> + else
> + flags = GPIOF_OUT_INIT_HIGH;
> +
> + ret = gpio_request_one(dvb->gpio, flags, NULL);
> + if (ret)
> + em28xx_errdev("gpio request failed %d\n", ret);
> + else
> + gpio_free(dvb->gpio);
> +
> + return ret;
> +#else
> + dev_warn(&dev->udev->dev, "%s: LNA control is disabled\n",
> + KBUILD_MODNAME);
> + return 0;
> +#endif
> +}
> +
> static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
> {
> /* Values extracted from a USB trace of the Terratec Windows driver */
> @@ -809,7 +837,7 @@ static void em28xx_unregister_dvb(struct em28xx_dvb *dvb)
>
> static int em28xx_dvb_init(struct em28xx *dev)
> {
> - int result = 0, mfe_shared = 0, gpio_chip_base;
> + int result = 0, mfe_shared = 0;
> struct em28xx_dvb *dvb;
>
> if (!dev->board.has_dvb) {
> @@ -958,7 +986,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
> dvb->fe[0] = dvb_attach(cxd2820r_attach,
> &em28xx_cxd2820r_config,
> &dev->i2c_adap,
> - &gpio_chip_base);
> + &dvb->gpio);
> if (dvb->fe[0]) {
> /* FE 0 attach tuner */
> if (!dvb_attach(tda18271_attach,
> @@ -973,15 +1001,17 @@ static int em28xx_dvb_init(struct em28xx *dev)
> }
> }
>
> +#ifdef CONFIG_GPIOLIB
> /* enable LNA for DVB-T, DVB-T2 and DVB-C */
> - result = gpio_request_one(gpio_chip_base, GPIOF_INIT_LOW,
> - "LNA");
> + result = gpio_request_one(dvb->gpio, GPIOF_OUT_INIT_LOW, NULL);
> if (result)
> em28xx_errdev("gpio request failed %d\n", result);
> else
> - gpio_free(gpio_chip_base);
> + gpio_free(dvb->gpio);
>
> result = 0; /* continue even set LNA fails */
> +#endif
> + dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna;
> break;
> case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
> {
--
Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
