Hi Guennadi,
On Tuesday 10 July 2012 14:06:51 Guennadi Liakhovetski wrote:
> On Thu, 5 Jul 2012, Laurent Pinchart wrote:
> > Several client drivers access the hardware at probe time, for instance
> > to read the probe chip ID. Such chips need to be powered up when being
> > probed.
> >
> > soc-camera handles this by powering chips up in the soc-camera probe
> > implementation. However, this will break with non soc-camera hosts that
> > don't perform the same operations.
> >
> > Fix the problem by pushing the power up/down from the soc-camera core
> > down to individual drivers on a needs basis.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> > ---
> >
> > drivers/media/video/imx074.c | 21 ++++++++--
> > drivers/media/video/mt9m001.c | 17 +++++++-
> > drivers/media/video/mt9m111.c | 80 ++++++++++++++++++--------------
> > drivers/media/video/mt9t031.c | 37 +++++++----------
> > drivers/media/video/mt9t112.c | 12 +++++-
> > drivers/media/video/mt9v022.c | 5 ++
> > drivers/media/video/ov2640.c | 11 ++++-
> > drivers/media/video/ov5642.c | 21 ++++++++--
> > drivers/media/video/ov6650.c | 19 ++++++---
> > drivers/media/video/ov772x.c | 14 ++++++-
> > drivers/media/video/ov9640.c | 17 ++++++--
> > drivers/media/video/ov9740.c | 23 +++++++----
> > drivers/media/video/rj54n1cb0c.c | 18 ++++++--
> > drivers/media/video/soc_camera.c | 20 ---------
> > drivers/media/video/tw9910.c | 12 +++++-
> > 15 files changed, 204 insertions(+), 123 deletions(-)
>
> [snip]
>
> > diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
> > index 9666e20..4f12177 100644
> > --- a/drivers/media/video/mt9t031.c
> > +++ b/drivers/media/video/mt9t031.c
> > @@ -161,14 +161,6 @@ static int mt9t031_idle(struct i2c_client *client)
> >
> > return ret >= 0 ? 0 : -EIO;
> >
> > }
> >
> > -static int mt9t031_disable(struct i2c_client *client)
> > -{
> > - /* Disable the chip */
> > - reg_clear(client, MT9T031_OUTPUT_CONTROL, 2);
> > -
> > - return 0;
> > -}
> > -
> >
> > static int mt9t031_s_stream(struct v4l2_subdev *sd, int enable)
> > {
> >
> > struct i2c_client *client = v4l2_get_subdevdata(sd);
> >
> > @@ -643,9 +635,15 @@ static int mt9t031_video_probe(struct i2c_client
> > *client)>
> > s32 data;
> > int ret;
> >
> > - /* Enable the chip */
> > - data = reg_write(client, MT9T031_CHIP_ENABLE, 1);
> > - dev_dbg(&client->dev, "write: %d\n", data);
> > + ret = mt9t031_s_power(&mt9t031->subdev, 1);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = mt9t031_idle(client);
> > + if (ret < 0) {
> > + dev_err(&client->dev, "Failed to initialise the camera\n");
> > + return ret;
>
> grm... don't you have to "goto done" here instead to disable the power
> again?
Sorry about that one. Will fix.
> > + }
> >
> > /* Read out the chip version register */
> > data = reg_read(client, MT9T031_CHIP_VERSION);
> >
> > @@ -657,16 +655,16 @@ static int mt9t031_video_probe(struct i2c_client
> > *client)>
> > default:
> > dev_err(&client->dev,
> >
> > "No MT9T031 chip detected, register read %x\n", data);
> >
> > - return -ENODEV;
> > + ret = -ENODEV;
> > + goto done;
> >
> > }
> >
> > dev_info(&client->dev, "Detected a MT9T031 chip ID %x\n", data);
> >
> > - ret = mt9t031_idle(client);
> > - if (ret < 0)
> > - dev_err(&client->dev, "Failed to initialise the camera\n");
> > - else
> > - v4l2_ctrl_handler_setup(&mt9t031->hdl);
> > + ret = v4l2_ctrl_handler_setup(&mt9t031->hdl);
> > +
> > +done:
> > + mt9t031_s_power(&mt9t031->subdev, 0);
> >
> > return ret;
> >
> > }
> >
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
