Hi Laurent,
Thanks for the patch. Just a few minor comments below.
Laurent Pinchart wrote:
...
> +static int mt9m032_setup_pll(struct mt9m032 *sensor)
> +{
> + static const struct aptina_pll_limits limits = {
> + .ext_clock_min = 8000000,
> + .ext_clock_max = 16500000,
> + .int_clock_min = 2000000,
> + .int_clock_max = 24000000,
> + .out_clock_min = 322000000,
> + .out_clock_max = 693000000,
> + .pix_clock_max = 99000000,
> + .n_min = 1,
> + .n_max = 64,
> + .m_min = 16,
> + .m_max = 255,
> + .p1_min = 1,
> + .p1_max = 128,
> + };
> +
> + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
> + struct mt9m032_platform_data *pdata = sensor->pdata;
> + struct aptina_pll pll;
> + int ret;
> +
> + pll.ext_clock = pdata->ext_clock;
> + pll.pix_clock = pdata->pix_clock;
> +
> + ret = aptina_pll_calculate(&client->dev, &limits, &pll);
> + if (ret < 0)
> + return ret;
> +
> + sensor->pix_clock = pll.pix_clock;
I wouldn't expect aptina_pll_calculate() to change the supplied pixel
clock. I'd consider it a bug if it does that. So you could use the pixel
clock from platform data equally well.
> + ret = mt9m032_write(client, MT9M032_PLL_CONFIG1,
> + (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT)
> + | (pll.p1 - 1));
> + if (!ret)
> + ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1);
> + if (!ret)
> + ret = mt9m032_write(client, MT9P031_PLL_CONTROL,
> + MT9P031_PLL_CONTROL_PWRON |
> + MT9P031_PLL_CONTROL_USEPLL);
> + if (!ret) /* more reserved, Continuous, Master Mode */
> + ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006);
> + if (!ret) /* Set 14-bit mode, select 7 divider */
> + ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e);
> +
> + return ret;
> +}
...
> +static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_fh *fh,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct mt9m032 *sensor = to_mt9m032(subdev);
> + int ret;
> +
> + mutex_lock(&sensor->lock);
> +
> + if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> + ret = -EBUSY;
> + goto done;
> + }
> +
> + /* Scaling is not supported, the format is thus fixed. */
> + ret = mt9m032_get_pad_format(subdev, fh, fmt);
> +
> +done:
> + mutex_lock(&sensor->lock);
> + return ret;
> +}
> +
> +static int mt9m032_get_crop(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_fh *fh,
> + struct v4l2_subdev_crop *crop)
> +{
> + struct mt9m032 *sensor = to_mt9m032(subdev);
> +
> + mutex_lock(&sensor->lock);
> + crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which);
> + mutex_unlock(&sensor->lock);
> +
> + return 0;
> +}
Shouldn't these two be renamed --- you've got "pad" in set/get fmt names
as well.
> +static int mt9m032_set_crop(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_fh *fh,
> + struct v4l2_subdev_crop *crop)
> +{
> + struct mt9m032 *sensor = to_mt9m032(subdev);
> + struct v4l2_mbus_framefmt *format;
> + struct v4l2_rect *__crop;
> + struct v4l2_rect rect;
> + int ret = 0;
> +
> + mutex_lock(&sensor->lock);
> +
> + if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> + ret = -EBUSY;
> + goto done;
> + }
> +
> + /* Clamp the crop rectangle boundaries and align them to a multiple of 2
> + * pixels to ensure a GRBG Bayer pattern.
> + */
> + rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN,
> + MT9M032_COLUMN_START_MAX);
> + rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN,
> + MT9M032_ROW_START_MAX);
> + rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN,
> + MT9M032_COLUMN_SIZE_MAX);
> + rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN,
> + MT9M032_ROW_SIZE_MAX);
> +
> + rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left);
> + rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top);
> +
> + __crop = __mt9m032_get_pad_crop(sensor, fh, crop->which);
> +
> + if (rect.width != __crop->width || rect.height != __crop->height) {
> + /* Reset the output image size if the crop rectangle size has
> + * been modified.
> + */
> + format = __mt9m032_get_pad_format(sensor, fh, crop->which);
> + format->width = rect.width;
> + format->height = rect.height;
> + }
> +
> + *__crop = rect;
> + crop->rect = rect;
> +
> + if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> + ret = mt9m032_update_geom_timing(sensor);
> +
> +done:
> + mutex_unlock(&sensor->lock);
> + return ret;
> +}
...
> +static int mt9m032_probe(struct i2c_client *client,
> + const struct i2c_device_id *devid)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + struct mt9m032 *sensor;
> + int chip_version;
> + int ret;
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
> + dev_warn(&client->dev,
> + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
> + return -EIO;
> + }
> +
> + if (!client->dev.platform_data)
> + return -ENODEV;
> +
> + sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
> + if (sensor == NULL)
> + return -ENOMEM;
> +
> + mutex_init(&sensor->lock);
> +
> + sensor->pdata = client->dev.platform_data;
> +
> + v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops);
> + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> + chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
> + if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
> + dev_err(&client->dev, "MT9M032 not detected, wrong version "
> + "0x%04x\n", chip_version);
> + ret = -ENODEV;
> + goto free_sensor;
> + }
> +
> + dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n",
> + client->addr);
> +
> + sensor->frame_interval.numerator = 1;
> + sensor->frame_interval.denominator = 30;
> +
> + sensor->crop.left = 416;
> + sensor->crop.top = 360;
> + sensor->crop.width = 640;
> + sensor->crop.height = 480;
How was the situation with this? Shouldn't the default be no cropping?
> + sensor->format.width = sensor->crop.width;
> + sensor->format.height = sensor->crop.height;
> + sensor->format.code = V4L2_MBUS_FMT_Y8_1X8;
> + sensor->format.field = V4L2_FIELD_NONE;
> + sensor->format.colorspace = V4L2_COLORSPACE_SRGB;
> +
> + v4l2_ctrl_handler_init(&sensor->ctrls, 4);
> +
> + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
> + V4L2_CID_GAIN, 0, 127, 1, 64);
> +
> + sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls,
> + &mt9m032_ctrl_ops,
> + V4L2_CID_HFLIP, 0, 1, 1, 0);
> + sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls,
> + &mt9m032_ctrl_ops,
> + V4L2_CID_VFLIP, 0, 1, 1, 0);
> +
> + v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
> + V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN,
> + MT9M032_SHUTTER_WIDTH_MAX, 1,
> + MT9M032_SHUTTER_WIDTH_DEF);
> +
> + if (sensor->ctrls.error) {
> + ret = sensor->ctrls.error;
> + dev_err(&client->dev, "control initialization error %d\n", ret);
> + goto free_ctrl;
> + }
> +
> + v4l2_ctrl_cluster(2, &sensor->hflip);
> +
> + sensor->subdev.ctrl_handler = &sensor->ctrls;
> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0);
> + if (ret < 0)
> + goto free_ctrl;
> +
> + ret = mt9m032_write(client, MT9M032_RESET, 1); /* reset on */
> + if (ret < 0)
> + goto free_ctrl;
I think you should do media_entity_cleanup() if this or anything past
this fails.
> + mt9m032_write(client, MT9M032_RESET, 0); /* reset off */
> + if (ret < 0)
> + goto free_ctrl;
> +
> + ret = mt9m032_setup_pll(sensor);
> + if (ret < 0)
> + goto free_ctrl;
> + usleep_range(10000, 11000);
> +
> + v4l2_ctrl_handler_setup(&sensor->ctrls);
> +
> + /* SIZE */
> + ret = mt9m032_update_geom_timing(sensor);
> + if (ret < 0)
> + goto free_ctrl;
> +
> + ret = mt9m032_write(client, 0x41, 0x0000); /* reserved !!! */
> + if (ret < 0)
> + goto free_ctrl;
> + ret = mt9m032_write(client, 0x42, 0x0003); /* reserved !!! */
> + if (ret < 0)
> + goto free_ctrl;
> + ret = mt9m032_write(client, 0x43, 0x0003); /* reserved !!! */
> + if (ret < 0)
> + goto free_ctrl;
> + ret = mt9m032_write(client, 0x7f, 0x0000); /* reserved !!! */
> + if (ret < 0)
> + goto free_ctrl;
> + if (sensor->pdata->invert_pixclock) {
> + ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL,
> + MT9M032_PIX_CLK_CTRL_INV_PIXCLK);
> + if (ret < 0)
> + goto free_ctrl;
> + }
> +
> + ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */
> + if (ret < 0)
> + goto free_ctrl;
> + msleep(100);
> + ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */
> + if (ret < 0)
> + goto free_ctrl;
> + msleep(100);
> + ret = update_formatter2(sensor, false);
> + if (ret < 0)
> + goto free_ctrl;
> +
> + return ret;
> +
> +free_ctrl:
> + v4l2_ctrl_handler_free(&sensor->ctrls);
> +
> +free_sensor:
> + mutex_destroy(&sensor->lock);
> + kfree(sensor);
> + return ret;
> +}
> +
> +static int mt9m032_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct mt9m032 *sensor = to_mt9m032(subdev);
> +
> + v4l2_device_unregister_subdev(&sensor->subdev);
> + v4l2_ctrl_handler_free(&sensor->ctrls);
> + media_entity_cleanup(&sensor->subdev.entity);
> + mutex_destroy(&sensor->lock);
> + kfree(sensor);
> + return 0;
> +}
Kind regards,
--
Sakari Ailus
sakari.ai...@iki.fi
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
