Hi Sakari,

Thanks for the patch.

On Thursday 08 March 2012 15:57:29 Sakari Ailus wrote:
> From: Sakari Ailus <sakari.ai...@maxwell.research.nokia.com>
> 
> Calculate PLL configuration based on input data: sensor configuration, board
> properties and sensor-specific limits.
> 
> Signed-off-by: Sakari Ailus <sakari.ai...@maxwell.research.nokia.com>

[snip]

> diff --git a/drivers/media/video/smiapp-pll.c
> b/drivers/media/video/smiapp-pll.c new file mode 100644
> index 0000000..c8ffdc9
> --- /dev/null
> +++ b/drivers/media/video/smiapp-pll.c

[snip]

> +     /*
> +      * Find pix_div such that a legal pix_div * sys_div results
> +      * into a value which is not smaller than div, the desired
> +      * divisor.
> +      */
> +     for (vt_div = min_vt_div; vt_div <= max_vt_div;
> +          vt_div += 2 - (vt_div & 1)) {
> +             for (sys_div = min_sys_div;
> +                  sys_div <= max_sys_div;
> +                  sys_div += 2 - (sys_div & 1)) {
> +                     int pix_div = DIV_ROUND_UP(vt_div, sys_div);
> +
> +                     if (pix_div <
> +                         limits->min_vt_pix_clk_div
> +                         || pix_div
> +                         > limits->max_vt_pix_clk_div) {

Maybe you should get some sleep, I've heard it helps memory ;-)

> +                             dev_dbg(dev,
> +                                     "pix_div %d too small or too big 
> (%d--%d)\n",
> +                                     pix_div,
> +                                     limits->min_vt_pix_clk_div,
> +                                     limits->max_vt_pix_clk_div);
> +                             continue;
> +                     }
> +
> +                     /* Check if this one is better. */
> +                     if (pix_div * sys_div
> +                         <= ALIGN(min_vt_div, best_pix_div))
> +                             best_pix_div = pix_div;
> +             }
> +             if (best_pix_div < INT_MAX >> 1)
> +                     break;
> +     }

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to