Compute the PLL parameters at runtime using the generic Aptina PLL
helper.
Remove the PLL parameters from platform data and pass the external clock
and desired internal clock frequencies instead.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
---
drivers/media/video/Kconfig | 1 +
drivers/media/video/mt9m032.c | 56 +++++++++++++++++++++++++++--------------
include/media/mt9m032.h | 4 +--
3 files changed, 39 insertions(+), 22 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 410baf2..2b3f4b1 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -949,6 +949,7 @@ config SOC_CAMERA_MT9M001
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
depends on I2C && VIDEO_V4L2
+ select VIDEO_APTINA_PLL
help
This driver supports MT9M032 cameras from Micron, monochrome
models only.
diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c
index 4cde779..da69e12 100644
--- a/drivers/media/video/mt9m032.c
+++ b/drivers/media/video/mt9m032.c
@@ -35,6 +35,8 @@
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
+#include "aptina-pll.h"
+
#define MT9M032_CHIP_VERSION 0x00
#define MT9M032_CHIP_VERSION_VALUE 0x1402
#define MT9M032_ROW_START 0x01
@@ -61,6 +63,7 @@
#define MT9M032_GAIN_BLUE 0x2c
#define MT9M032_GAIN_RED 0x2d
#define MT9M032_GAIN_GREEN2 0x2e
+
/* write only */
#define MT9M032_GAIN_ALL 0x35
#define MT9M032_GAIN_DIGITAL_MASK 0x7f
@@ -83,6 +86,8 @@
#define MT9P031_PLL_CONTROL_PWROFF 0x0050
#define MT9P031_PLL_CONTROL_PWRON 0x0051
#define MT9P031_PLL_CONTROL_USEPLL 0x0052
+#define MT9P031_PLL_CONFIG2 0x11
+#define MT9P031_PLL_CONFIG2_P1_DIV_MASK 0x1f
/*
* width and height include active boundry and black parts
@@ -222,32 +227,45 @@ static int update_formatter2(struct mt9m032 *sensor, bool
streaming)
static int mt9m032_setup_pll(struct mt9m032 *sensor)
{
+ static const struct aptina_pll_limits limits = {
+ .ext_clock_min = 8000000,
+ .ext_clock_max = 16500000,
+ .int_clock_min = 2000000,
+ .int_clock_max = 24000000,
+ .out_clock_min = 322000000,
+ .out_clock_max = 693000000,
+ .pix_clock_max = 99000000,
+ .n_min = 1,
+ .n_max = 64,
+ .m_min = 16,
+ .m_max = 255,
+ .p1_min = 1,
+ .p1_max = 128,
+ };
+
struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
- struct mt9m032_platform_data* pdata = sensor->pdata;
- u16 reg_pll1;
- unsigned int pre_div;
+ struct mt9m032_platform_data *pdata = sensor->pdata;
+ struct aptina_pll pll;
int ret;
- /* TODO: also support other pre-div values */
- if (pdata->pll_pre_div != 6) {
- dev_warn(to_dev(sensor),
- "Unsupported PLL pre-divisor value %u, using default
6\n",
- pdata->pll_pre_div);
- }
- pre_div = 6;
+ pll.ext_clock = pdata->ext_clock;
+ pll.pix_clock = pdata->pix_clock;
- sensor->pix_clock = pdata->ext_clock * pdata->pll_mul /
- (pre_div * pdata->pll_out_div);
+ ret = aptina_pll_configure(&client->dev, &pll, &limits);
+ if (ret < 0)
+ return ret;
- reg_pll1 = ((pdata->pll_out_div - 1) & MT9M032_PLL_CONFIG1_OUTDIV_MASK)
- | pdata->pll_mul << MT9M032_PLL_CONFIG1_MUL_SHIFT;
+ sensor->pix_clock = pll.pix_clock;
- ret = mt9m032_write_reg(client, MT9M032_PLL_CONFIG1, reg_pll1);
+ ret = mt9m032_write_reg(client, MT9M032_PLL_CONFIG1,
+ (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT)
+ | (pll.p1 - 1));
if (!ret)
- ret = mt9m032_write_reg(client,
- MT9P031_PLL_CONTROL,
- MT9P031_PLL_CONTROL_PWRON |
MT9P031_PLL_CONTROL_USEPLL);
-
+ ret = mt9m032_write_reg(client, MT9P031_PLL_CONFIG2, pll.n - 1);
+ if (!ret)
+ ret = mt9m032_write_reg(client, MT9P031_PLL_CONTROL,
+ MT9P031_PLL_CONTROL_PWRON |
+ MT9P031_PLL_CONTROL_USEPLL);
if (!ret)
ret = mt9m032_write_reg(client, MT9M032_READ_MODE1, 0x8006);
/* more reserved,
Continuous */
diff --git a/include/media/mt9m032.h b/include/media/mt9m032.h
index 94cefc5..804e0a5 100644
--- a/include/media/mt9m032.h
+++ b/include/media/mt9m032.h
@@ -29,9 +29,7 @@
struct mt9m032_platform_data {
u32 ext_clock;
- u32 pll_pre_div;
- u32 pll_mul;
- u32 pll_out_div;
+ u32 pix_clock;
int invert_pixclock;
};
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
