From: Hans Verkuil <hans.verk...@cisco.com>
These new ioctls make it possible for the dv_timings API to replace
the dv_preset API eventually.
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
include/linux/videodev2.h | 110 ++++++++++++++++++++++++++++++++++++++++----
1 files changed, 100 insertions(+), 10 deletions(-)
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 0db0503..e59cd02 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -987,28 +987,42 @@ struct v4l2_dv_enum_preset {
*/
/* BT.656/BT.1120 timing data */
+
+/*
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the active frame is
+ * calculated as follows:
+ *
+ * act_height = height - vfrontporch - vsync - vbackporch -
+ * il_vfrontporch - il_vsync - il_vbackporch
+ *
+ * The active height of each field is act_height / 2.
+ */
struct v4l2_bt_timings {
- __u32 width; /* width in pixels */
- __u32 height; /* height in lines */
+ __u32 width; /* total frame width in pixels */
+ __u32 height; /* total frame height in lines */
__u32 interlaced; /* Interlaced or progressive */
__u32 polarities; /* Positive or negative polarity */
__u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
- __u32 hfrontporch; /* Horizpontal front porch in pixels */
+ __u32 hfrontporch; /* Horizontal front porch in pixels */
__u32 hsync; /* Horizontal Sync length in pixels */
__u32 hbackporch; /* Horizontal back porch in pixels */
__u32 vfrontporch; /* Vertical front porch in pixels */
__u32 vsync; /* Vertical Sync length in lines */
__u32 vbackporch; /* Vertical back porch in lines */
- __u32 il_vfrontporch; /* Vertical front porch for bottom field of
- * interlaced field formats
+ __u32 il_vfrontporch; /* Vertical front porch for the even field
+ * (aka field 2) of interlaced field formats
*/
- __u32 il_vsync; /* Vertical sync length for bottom field of
- * interlaced field formats
+ __u32 il_vsync; /* Vertical sync length for the even field
+ * (aka field 2) of interlaced field formats
*/
- __u32 il_vbackporch; /* Vertical back porch for bottom field of
- * interlaced field formats
+ __u32 il_vbackporch; /* Vertical back porch for the even field
+ * (aka field 2) of interlaced field formats
*/
- __u32 reserved[16];
+ __u32 standards; /* Standards the timing belongs to */
+ __u32 flags; /* Flags */
+ __u32 reserved[14];
} __attribute__ ((packed));
/* Interlaced or progressive format */
@@ -1019,6 +1033,37 @@ struct v4l2_bt_timings {
#define V4L2_DV_VSYNC_POS_POL 0x00000001
#define V4L2_DV_HSYNC_POS_POL 0x00000002
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+ GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+ intervals are reduced, allowing a higher resolution over the same
+ bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+ of six. These formats can be optionally played at 1 / 1.001 speed to
+ be compatible with the normal NTSC framerate of 29.97 frames per second.
+ This is a read-only flag. */
+#define V4L2_DV_FL_NTSC_COMPATIBLE (1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+ by receivers.
+ If the framerate of the format is a multiple of six, then the pixelclock
+ used to set up the transmitter is divided by 1.001 to make it compatible
+ with NTSC framerates. Otherwise this flag is cleared. If the transmitter
+ can't generate such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_DIVIDE_CLOCK_BY_1_001 (1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+ longer and field 2 is really one half-line shorter, so each field has
+ exactly the same number of half-lines. Whether half-lines can be detected
+ or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE (1 << 0)
+
/* DV timings */
struct v4l2_dv_timings {
@@ -1032,6 +1077,47 @@ struct v4l2_dv_timings {
/* Values for the type field */
#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
+
+/* DV timings enumeration */
+struct v4l2_enum_dv_timings {
+ __u32 index;
+ __u32 reserved[3];
+ struct v4l2_dv_timings timings;
+};
+
+/* BT.656/BT.1120 timing capabilities */
+struct v4l2_bt_timings_cap {
+ __u32 min_width; /* width in pixels */
+ __u32 max_width; /* width in pixels */
+ __u32 min_height; /* height in lines */
+ __u32 max_height; /* height in lines */
+ __u64 min_pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
+ __u64 max_pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
+ __u32 standards; /* Supported standards */
+ __u32 capabilities; /* See below */
+ __u32 reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED (1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM (1 << 3)
+
+/* DV timings capabilities */
+struct v4l2_dv_timings_cap {
+ __u32 type;
+ __u32 reserved[3];
+ union {
+ struct v4l2_bt_timings_cap bt;
+ __u32 raw_data[32];
+ };
+};
+
+
/*
* V I D E O I N P U T S
*/
@@ -2318,6 +2404,10 @@ struct v4l2_create_buffers {
#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection)
#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection)
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
