Hi Mauro,
your patch fixes the problem for the tda10021.c and tda10023.c. The drxk_hard.c
is a
second problem. It is introduced by tda18271c2dd.c:
static int set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
struct tda_state *state = fe->tuner_priv;
int status = 0;
int Standard;
u32 bw = fe->dtv_property_cache.bandwidth_hz;
u32 delsys = fe->dtv_property_cache.delivery_system;
state->m_Frequency = fe->dtv_property_cache.frequency;
switch (delsys) {
case SYS_DVBT:
case SYS_DVBT2:
switch (bw) {
case 6000000:
Standard = HF_DVBT_6MHZ;
break;
case 7000000:
Standard = HF_DVBT_7MHZ;
break;
case 8000000:
Standard = HF_DVBT_8MHZ;
break;
default:
return -EINVAL;
}
case SYS_DVBC_ANNEX_A:
case SYS_DVBC_ANNEX_C:
if (bw <= 6000000)
Standard = HF_DVBC_6MHZ;
else if (bw <= 7000000)
Standard = HF_DVBC_7MHZ;
else
Standard = HF_DVBC_8MHZ;
default:
return -EINVAL;
}
A break is missing before the default statement. Delivery systems for DVB-C
result always
in an error. It is difficult for me to find the file itself with this content
in the git
repositories. I got the file from
http://linuxtv.org/downloads/drivers/linux-media-2011-12-25.tar.bz2.
Regards,
Hartmut
Am 30.12.2011 14:19, schrieb Mauro Carvalho Chehab:
> On 28-12-2011 13:50, e9hack wrote:
>> Hi Mauro,
>>
>> your changset breaks the auto-inversion capability of dvb_frontend.c for
>> frontends which
>> doesn't implement auto-inversion. Currently tda10021.c, tda10023.c and
>> drxk_hard.c are not
>> working. They fail at the following check:
>>
>>
>> 231 static int tda10021_set_parameters (struct dvb_frontend *fe)
>> ....
>> 232 {
>> 279 if (c->inversion != INVERSION_ON && c->inversion !=
>> INVERSION_OFF)
>> 280 return -EINVAL;
>>
>> The given inversion is INVERSION_AUTO.
>>
>> Regards,
>> Hartmut
>>
>
> Hi Hartmut,
>
> Thanks for testing!
>
> The issue here is that the dvb_frontend sometimes update only the DVBv3
> parameters.
>
> This is probably affecting DVBv5 drivers that may be lacking some features,
> like zigzag support and DVB core emulation for INVERSION_AUTO.
>
> The enclosed patch should fix it.
>
> I'll latter dig into dvb_frontend, in order to replace the tests for info.type
> there to c->delivery_system, as it might still have some bugs there due to
> that.
>
> From: Mauro Carvalho Chehab <mche...@redhat.com>
> Date: Fri, 30 Dec 2011 10:30:25 -0200
> Subject: [PATCH] dvb_frontend: Fix inversion breakage due to DVBv5 conversion
>
> On several places inside dvb_frontend, only the DVBv3 parameters
> were updated. Change it to be sure that, on all places, the DVBv5
> parameters will be changed instead.
>
> Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
>
> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c
> b/drivers/media/dvb/dvb-core/dvb_frontend.c
> index 9dd30be..9d092a6 100644
> --- a/drivers/media/dvb/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
> @@ -288,12 +288,13 @@ static int dvb_frontend_swzigzag_autotune(struct
> dvb_frontend *fe, int check_wra
> int ready = 0;
> int fe_set_err = 0;
> struct dvb_frontend_private *fepriv = fe->frontend_priv;
> - int original_inversion = fepriv->parameters_in.inversion;
> - u32 original_frequency = fepriv->parameters_in.frequency;
> + struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
> + int original_inversion = c->inversion;
> + u32 original_frequency = c->frequency;
>
> /* are we using autoinversion? */
> autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
> - (fepriv->parameters_in.inversion == INVERSION_AUTO));
> + (c->inversion == INVERSION_AUTO));
>
> /* setup parameters correctly */
> while(!ready) {
> @@ -359,19 +360,20 @@ static int dvb_frontend_swzigzag_autotune(struct
> dvb_frontend *fe, int check_wra
> fepriv->auto_step, fepriv->auto_sub_step,
> fepriv->started_auto_step);
>
> /* set the frontend itself */
> - fepriv->parameters_in.frequency += fepriv->lnb_drift;
> + c->frequency += fepriv->lnb_drift;
> if (autoinversion)
> - fepriv->parameters_in.inversion = fepriv->inversion;
> + c->inversion = fepriv->inversion;
> + tmp = *c;
> if (fe->ops.set_frontend)
> fe_set_err = fe->ops.set_frontend(fe);
> - fepriv->parameters_out = fepriv->parameters_in;
> + *c = tmp;
> if (fe_set_err < 0) {
> fepriv->state = FESTATE_ERROR;
> return fe_set_err;
> }
>
> - fepriv->parameters_in.frequency = original_frequency;
> - fepriv->parameters_in.inversion = original_inversion;
> + c->frequency = original_frequency;
> + c->inversion = original_inversion;
>
> fepriv->auto_sub_step++;
> return 0;
> @@ -382,6 +384,7 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
> fe_status_t s = 0;
> int retval = 0;
> struct dvb_frontend_private *fepriv = fe->frontend_priv;
> + struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp;
>
> /* if we've got no parameters, just keep idling */
> if (fepriv->state & FESTATE_IDLE) {
> @@ -393,9 +396,10 @@ static void dvb_frontend_swzigzag(struct dvb_frontend
> *fe)
> /* in SCAN mode, we just set the frontend when asked and leave it alone
> */
> if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) {
> if (fepriv->state & FESTATE_RETUNE) {
> + tmp = *c;
> if (fe->ops.set_frontend)
> retval = fe->ops.set_frontend(fe);
> - fepriv->parameters_out = fepriv->parameters_in;
> + *c = tmp;
> if (retval < 0)
> fepriv->state = FESTATE_ERROR;
> else
> @@ -425,8 +429,8 @@ static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
>
> /* if we're tuned, then we have determined the correct
> inversion */
> if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) &&
> - (fepriv->parameters_in.inversion == INVERSION_AUTO)) {
> - fepriv->parameters_in.inversion = fepriv->inversion;
> + (c->inversion == INVERSION_AUTO)) {
> + c->inversion = fepriv->inversion;
> }
> return;
> }
> @@ -1976,14 +1980,14 @@ static int dvb_frontend_ioctl_legacy(struct file
> *file,
>
> /* force auto frequency inversion if requested */
> if (dvb_force_auto_inversion) {
> - fepriv->parameters_in.inversion = INVERSION_AUTO;
> + c->inversion = INVERSION_AUTO;
> }
> if (fe->ops.info.type == FE_OFDM) {
> /* without hierarchical coding code_rate_LP is
> irrelevant,
> * so we tolerate the otherwise invalid FEC_NONE
> setting */
> - if (fepriv->parameters_in.u.ofdm.hierarchy_information
> == HIERARCHY_NONE &&
> - fepriv->parameters_in.u.ofdm.code_rate_LP ==
> FEC_NONE)
> - fepriv->parameters_in.u.ofdm.code_rate_LP =
> FEC_AUTO;
> + if (c->hierarchy == HIERARCHY_NONE &&
> + c->code_rate_LP == FEC_NONE)
> + c->code_rate_LP = FEC_AUTO;
> }
>
> /* get frontend-specific tuning settings */
> @@ -1996,8 +2000,8 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
> switch(fe->ops.info.type) {
> case FE_QPSK:
> fepriv->min_delay = HZ/20;
> - fepriv->step_size =
> fepriv->parameters_in.u.qpsk.symbol_rate / 16000;
> - fepriv->max_drift =
> fepriv->parameters_in.u.qpsk.symbol_rate / 2000;
> + fepriv->step_size = c->symbol_rate / 16000;
> + fepriv->max_drift = c->symbol_rate / 2000;
> break;
>
> case FE_QAM:
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
