The tvp5150 video decoder has two operation modes to configure the video standard used.
If auto-switch mode is enable, the device can sense the signal and detect which video standard the device is operating. Also the device can be forced to use a user defined video standard. Each operation mode uses a different register and the bitmask values to represent each standard is different. So we add video standard constants for both autoswitch and no-autoswitch mode. Signed-off-by: Javier Martinez Canillas <martinez.jav...@gmail.com> --- drivers/media/video/tvp5150_reg.h | 17 ++++++++++++++++- 1 files changed, 16 insertions(+), 1 deletions(-) diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h index 4240043..25a9949 100644 --- a/drivers/media/video/tvp5150_reg.h +++ b/drivers/media/video/tvp5150_reg.h @@ -45,7 +45,22 @@ /* Reserved 1Fh-27h */ -#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_MASK (0x07 >> 1) +#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_AUTO_SWITCH_BIT 0x00 +#define VIDEO_STD_NTSC_MJ_BIT 0x02 +#define VIDEO_STD_PAL_BDGHIN_BIT 0x04 +#define VIDEO_STD_PAL_M_BIT 0x06 +#define VIDEO_STD_PAL_COMBINATION_N_BIT 0x08 +#define VIDEO_STD_NTSC_4_43_BIT 0x0a +#define VIDEO_STD_SECAM_BIT 0x0c + +#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01 +#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03 +#define VIDEO_STD_PAL_M_BIT_AS 0x05 +#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07 +#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09 +#define VIDEO_STD_SECAM_BIT_AS 0x0b /* Reserved 29h-2bh */ -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
