On 2011-09-27 07:40, Deepthy Ravi wrote:
This patchset
-adds support for MT9T111 sensor on omap3evm.
Currently the sensor driver supports only
VGA resolution.
-enables MT9T111 sensor in omap2plus_defconfig.
This is dependent on the following patchset
http://www.spinics.net/lists/linux-media/msg37270.html
which adds YUYV input support for OMAP3ISP. And is
applied on top of rc1-for-3.2 of gliakhovetski/v4l-dvb.git
Why not use the same base as Lennart?
The set is based on
http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-omap3isp-next
---
Changes in v2:
As per the discussion here,
https://lkml.org/lkml/2011/9/20/280
the existing mt9t112 driver is reused for
adding support for mt9t111 sensor.
Deepthy Ravi (3):
[media] v4l: Add support for mt9t111 sensor driver
ispccdc: Configure CCDC_SYN_MODE register
omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers
Vaibhav Hiremath (2):
omap3evm: Enable regulators for camera interface
omap3evm: Add Camera board init/hookup file
arch/arm/configs/omap2plus_defconfig | 9 +
arch/arm/mach-omap2/Makefile | 5 +
arch/arm/mach-omap2/board-omap3evm-camera.c | 185 ++++
arch/arm/mach-omap2/board-omap3evm.c | 26 +
drivers/media/video/Kconfig | 7 +
drivers/media/video/Makefile | 1 +
drivers/media/video/mt9t111_reg.h | 1367 +++++++++++++++++++++++++++
drivers/media/video/mt9t112.c | 320 ++++++-
drivers/media/video/omap3isp/ispccdc.c | 11 +-
include/media/mt9t111.h | 45 +
10 files changed, 1937 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
create mode 100644 drivers/media/video/mt9t111_reg.h
create mode 100644 include/media/mt9t111.h
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
