> -----Original Message----- > From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap- > ow...@vger.kernel.org] On Behalf Of Laurent Pinchart > Sent: Monday, September 19, 2011 3:29 AM > To: Martin Hostettler > Cc: Tony Lindgren; linux-o...@vger.kernel.org; linux- > me...@vger.kernel.org; linux-arm-ker...@lists.infradead.org > Subject: Re: [PATCH v2] arm: omap3evm: Add support for an MT9M032 based > camera board. > > Hi Martin, > > On Saturday 17 September 2011 11:34:57 Martin Hostettler wrote: > > Adds board support for an MT9M032 based camera to omap3evm. > > > > Sigend-off-by: Martin Hostettler <mar...@neutronstar.dyndns.org> > > --- > > arch/arm/mach-omap2/Makefile | 1 + > > arch/arm/mach-omap2/board-omap3evm-camera.c | 183 > > +++++++++++++++++++++++++++ 2 files changed, 184 insertions(+), 0 > > deletions(-) > > create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c > > > > Changes in V2: > > * ported to current mainline > > * Style fixes > > * Fix error handling > > > > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > > index f343365..8ae3d25 100644 > > --- a/arch/arm/mach-omap2/Makefile > > +++ b/arch/arm/mach-omap2/Makefile > > @@ -202,6 +202,7 @@ obj-$(CONFIG_MACH_OMAP3_TORPEDO) += > > board-omap3logic.o \ obj-$(CONFIG_MACH_OVERO) += > > board-overo.o \ > > hsmmc.o > > obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ > > + board-omap3evm-camera.o \ > > hsmmc.o > > obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ > > hsmmc.o > > diff --git a/arch/arm/mach-omap2/board-omap3evm-camera.c > > b/arch/arm/mach-omap2/board-omap3evm-camera.c new file mode 100644 > > index 0000000..be987d9 > > --- /dev/null > > +++ b/arch/arm/mach-omap2/board-omap3evm-camera.c > > @@ -0,0 +1,183 @@ > > +/* > > + * Copyright (C) 2010-2011 Lund Engineering > > + * Contact: Gil Lund <gwl...@lundeng.com> > > + * Author: Martin Hostettler <mar...@neutronstar.dyndns.org> > > + * [Hiremath, Vaibhav] The file below seems copied from (which is coming from all older releases of TI)
http://arago-project.org/git/projects/?p=linux-omap3.git;a=blob;f=arch/arm/mach-omap2/board-omap3evm-camera.c;h=2e6ccfef69027dee880d507b98b5a7998d4bbe7e;hb=adcd067326836777c049e3cb32a5b7d9d401fc31 So I would appreciate if you keep original copyright and authorship of the file and add your sign-off to the patch. Thanks, Vaibhav > > + * Board intregration for a MT9M032 camera connected to IMAGE_CONN and > I2C > > Bus 2 + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License > > + * version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, but > > + * WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > > + * General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > > + * 02110-1301 USA > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/init.h> > > +#include <linux/platform_device.h> > > + > > +#include <linux/gpio.h> > > +#include <plat/mux.h> > > +#include "mux.h" > > + > > +#include "../../../drivers/media/video/omap3isp/isp.h" > > +#include "media/mt9m032.h" > > + > > +#include "devices.h" > > + > > +#define EVM_TWL_GPIO_BASE OMAP_MAX_GPIO_LINES > > +#define GPIO98_VID_DEC_RES 98 > > +#define nCAM_VD_SEL 157 > > + > > +#define MT9M032_I2C_BUS_NUM 2 > > + > > + > > +enum omap3evmdc_mux { > > + MUX_TVP5146, > > + MUX_CAMERA_SENSOR, > > + MUX_EXP_CAMERA_SENSOR, > > +}; > > + > > +/** > > + * omap3evm_set_mux - Sets mux to enable signal routing to > > + * different peripherals present on new EVM > > board + * @mux_id: enum, mux id to enable > > + * > > + * Returns 0 for success or a negative error code > > + */ > > +static int omap3evm_set_mux(enum omap3evmdc_mux mux_id) > > +{ > > + /* Set GPIO6 = 1 */ > > + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 6, 1); > > + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); > > + > > + switch (mux_id) { > > + case MUX_TVP5146: > > + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); > > + gpio_set_value(nCAM_VD_SEL, 1); > > + break; > > + > > + case MUX_CAMERA_SENSOR: > > + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 0); > > + gpio_set_value(nCAM_VD_SEL, 0); > > + break; > > + > > + case MUX_EXP_CAMERA_SENSOR: > > + gpio_set_value_cansleep(EVM_TWL_GPIO_BASE + 2, 1); > > + break; > > + > > + default: > > + pr_err("omap3evm-camera: Invalid mux id #%d\n", mux_id); > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static struct mt9m032_platform_data mt9m032_platform_data = { > > + .ext_clock = 13500000, > > + .pll_pre_div = 6, > > + .pll_mul = 120, > > + .pll_out_div = 5, > > + .invert_pixclock = 1, > > +}; > > + > > +static struct i2c_board_info camera_i2c_devices[] = { > > + { > > + I2C_BOARD_INFO(MT9M032_NAME, MT9M032_I2C_ADDR), > > + .platform_data = &mt9m032_platform_data, > > + }, > > +}; > > + > > +static struct isp_subdev_i2c_board_info camera_i2c_subdevs[] = { > > + { > > + .board_info = &camera_i2c_devices[0], > > + .i2c_adapter_id = MT9M032_I2C_BUS_NUM, > > + }, > > + {}, > > +}; > > + > > +static struct isp_v4l2_subdevs_group camera_subdevs[] = { > > + { > > + .subdevs = camera_i2c_subdevs, > > + .interface = ISP_INTERFACE_PARALLEL, > > + .bus = { > > + .parallel = { > > + .data_lane_shift = 1, > > + .clk_pol = 0, > > + .bridge = ISPCTRL_PAR_BRIDGE_DISABLE, > > + } > > + }, > > + }, > > + {}, > > +}; > > + > > +static struct isp_platform_data isp_platform_data = { > > + .subdevs = camera_subdevs, > > +}; > > + > > +static int __init camera_init(void) > > +{ > > + int ret = -EINVAL; > > + > > + omap_mux_init_gpio(nCAM_VD_SEL, OMAP_PIN_OUTPUT); > > + if (gpio_request(nCAM_VD_SEL, "nCAM_VD_SEL") < 0) { > > + pr_err("omap3evm-camera: Failed to get GPIO nCAM_VD_SEL(%d)\n", > > + nCAM_VD_SEL); > > + goto err; > > + } > > + if (gpio_direction_output(nCAM_VD_SEL, 1) < 0) { > > + pr_err("omap3evm-camera: Failed to set GPIO nCAM_VD_SEL(%d) > > direction\n", + nCAM_VD_SEL); > > + goto err_vdsel; > > + } > > + > > + if (gpio_request(EVM_TWL_GPIO_BASE + 2, "T2_GPIO2") < 0) { > > + pr_err("omap3evm-camera: Failed to get GPIO T2_GPIO2(%d)\n", > > + EVM_TWL_GPIO_BASE + 2); > > + goto err_vdsel; > > + } > > + if (gpio_direction_output(EVM_TWL_GPIO_BASE + 2, 0) < 0) { > > + pr_err("omap3evm-camera: Failed to set GPIO T2_GPIO2(%d) > direction\n", > > + EVM_TWL_GPIO_BASE + 2); > > + goto err_2; > > + } > > + > > + if (gpio_request(EVM_TWL_GPIO_BASE + 8, "nCAM_VD_EN") < 0) { > > + pr_err("omap3evm-camera: Failed to get GPIO nCAM_VD_EN(%d)\n", > > + EVM_TWL_GPIO_BASE + 8); > > + goto err_2; > > + } > > + if (gpio_direction_output(EVM_TWL_GPIO_BASE + 8, 0) < 0) { > > + pr_err("omap3evm-camera: Failed to set GPIO nCAM_VD_EN(%d) > direction\n", > > + EVM_TWL_GPIO_BASE + 8); > > + goto err_8; > > + } > > + > > + omap3evm_set_mux(MUX_CAMERA_SENSOR); > > + > > + > > + ret = omap3_init_camera(&isp_platform_data); > > + if (ret < 0) > > + goto err_8; > > + return 0; > > + > > +err_8: > > + gpio_free(EVM_TWL_GPIO_BASE + 8); > > +err_2: > > + gpio_free(EVM_TWL_GPIO_BASE + 2); > > +err_vdsel: > > + gpio_free(nCAM_VD_SEL); > > +err: > > + return ret; > > +} > > + > > +device_initcall(camera_init); > > Please don't use device_initcall(), but call the function directly from > the > OMAP3 EVM init handler. Otherwise camera_init() will be called if OMAP3 > EVM > support is compiled in the kernel, regardless of the board the kernel runs > on. > > -- > Regards, > > Laurent Pinchart > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
