From: Vaibhav Hiremath <hvaib...@ti.com>
In OMAP3EVM Rev G, TVP5146 video decoder is populated on the
main board. This decoder is registered as a subdevice to the
media-controller/omap3isp.
Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com>
Signed-off-by: Deepthy Ravi <deepthy.r...@ti.com>
---
arch/arm/mach-omap2/Makefile | 5 +
arch/arm/mach-omap2/board-omap3evm-camera.c | 253 +++++++++++++++++++++++++++
arch/arm/mach-omap2/board-omap3evm.c | 4 +
include/media/tvp514x.h | 3 +
4 files changed, 265 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e43d94b..66ac9fe 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -272,3 +272,8 @@ disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o twl-common.o
+
+ifeq ($(CONFIG_MACH_OMAP3EVM),y)
+evm-camera-$(CONFIG_VIDEO_OMAP3) := board-omap3evm-camera.o
+obj-y += $(evm-camera-m) $(evm-camera-y)
+endif
diff --git a/arch/arm/mach-omap2/board-omap3evm-camera.c
b/arch/arm/mach-omap2/board-omap3evm-camera.c
new file mode 100644
index 0000000..718dd6d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm-camera.c
@@ -0,0 +1,253 @@
+/*
+ * arch/arm/mach-omap2/board-omap3evm-camera.c
+ *
+ * OMAP3EVM: Driver for TVP5146 module
+ *
+ * Copyright (C) 2011 Texas Instruments Inc
+ * Author: Vaibhav Hiremath <hvaib...@ti.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <mach/gpio.h>
+#include <media/tvp514x.h>
+#include <media/omap3isp.h>
+#include "devices.h"
+
+#define CAM_USE_XCLKA 0
+
+#define TVP5146_DEC_RST 98
+#define T2_GPIO_2 194
+#define nCAM_VD_SEL 157
+#define nCAM_VD_EN 200
+
+static struct regulator *omap3evm_1v8;
+static struct regulator *omap3evm_2v8;
+
+
+/* mux id to enable/disable signal routing to different peripherals */
+enum omap3evm_cam_mux {
+ MUX_EN_TVP5146 = 0,
+ MUX_EN_CAMERA_SENSOR,
+ MUX_EN_EXP_CAMERA_SENSOR,
+ MUX_INVALID,
+};
+
+static int omap3evm_regulator_ctrl(u32 on)
+{
+ if (!omap3evm_1v8 || !omap3evm_2v8) {
+ printk(KERN_ERR "No regulator available\n");
+ return -ENODEV;
+ }
+ if (on) {
+ regulator_enable(omap3evm_1v8);
+ mdelay(1);
+ regulator_enable(omap3evm_2v8);
+ mdelay(50);
+ } else {
+ if (regulator_is_enabled(omap3evm_1v8))
+ regulator_disable(omap3evm_1v8);
+ if (regulator_is_enabled(omap3evm_2v8))
+ regulator_disable(omap3evm_2v8);
+ }
+ return 0;
+}
+/**
+ * @brief omap3evm_set_mux - Sets mux to enable/disable signal routing to
+ * different peripherals present on new EVM board
+ *
+ * @param mux_id - enum, mux id to enable/disable
+ * @param value - enum, ENABLE_MUX for enabling and DISABLE_MUX for disabling
+ *
+ */
+static void omap3evm_set_mux(enum omap3evm_cam_mux mux_id)
+{
+ switch (mux_id) {
+ /*
+ * JP1 jumper need to configure to choose between on-board
+ * camera sensor conn and on-board LI-3MC02 camera sensor.
+ */
+ case MUX_EN_CAMERA_SENSOR:
+ /* Set nCAM_VD_EN (T2_GPIO8) = 0 */
+ gpio_set_value_cansleep(nCAM_VD_EN, 0);
+ /* Set nCAM_VD_SEL (GPIO157) = 0 */
+ gpio_set_value(nCAM_VD_SEL, 0);
+ break;
+ case MUX_EN_EXP_CAMERA_SENSOR:
+ /* Set nCAM_VD_EN (T2_GPIO8) = 1 */
+ gpio_set_value_cansleep(nCAM_VD_EN, 1);
+ break;
+ case MUX_EN_TVP5146:
+ default:
+ /* Set nCAM_VD_EN (T2_GPIO8) = 0 */
+ gpio_set_value_cansleep(nCAM_VD_EN, 0);
+ /* Set nCAM_VD_SEL (GPIO157) = 1 */
+ gpio_set_value(nCAM_VD_SEL, 1);
+ break;
+ }
+}
+
+/* TVP5146: Video Decoder */
+static int omap3evm_tvp514x_s_power(struct v4l2_subdev *subdev, u32 on)
+{
+ int ret;
+ ret = omap3evm_regulator_ctrl(on);
+ if (ret)
+ return ret;
+ omap3evm_set_mux(MUX_EN_TVP5146);
+ return 0;
+}
+
+static struct tvp514x_platform_data omap3evm_tvp514x_platform_data = {
+ .s_power = omap3evm_tvp514x_s_power,
+};
+
+#define TVP514X_I2C_BUS_NUM 3
+
+static struct i2c_board_info omap3evm_camera_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("tvp5146m2", 0x5C),
+ .platform_data = &omap3evm_tvp514x_platform_data,
+ },
+};
+static struct isp_subdev_i2c_board_info omap3evm_tvp514x_subdevs[] = {
+ {
+ .board_info = &omap3evm_camera_i2c_devices[0],
+ .i2c_adapter_id = TVP514X_I2C_BUS_NUM,
+ },
+ { NULL, 0 },
+};
+
+static struct isp_v4l2_subdevs_group omap3evm_camera_subdevs[] = {
+ {
+ .subdevs = omap3evm_tvp514x_subdevs,
+ .interface = ISP_INTERFACE_PARALLEL,
+ .bus = {
+ .parallel = {
+ .data_lane_shift = 1,
+ .clk_pol = 0,
+ .bridge = 0,
+ },
+ }
+ },
+ { NULL, 0 },
+};
+
+static struct isp_platform_data omap3evm_isp_platform_data = {
+ .subdevs = omap3evm_camera_subdevs,
+};
+
+static int __init omap3evm_cam_init(void)
+{
+ int ret = 0;
+
+ /*
+ * Regulator supply required for camera interface
+ */
+ omap3evm_1v8 = regulator_get(NULL, "cam_1v8");
+ if (IS_ERR(omap3evm_1v8)) {
+ printk(KERN_ERR "cam_1v8 regulator missing\n");
+ return PTR_ERR(omap3evm_1v8);
+ }
+ omap3evm_2v8 = regulator_get(NULL, "cam_2v8");
+ if (IS_ERR(omap3evm_2v8)) {
+ printk(KERN_ERR "cam_2v8 regulator missing\n");
+ ret = PTR_ERR(omap3evm_2v8);
+ goto err_1;
+ }
+
+ /*
+ * First level GPIO enable: T2_GPIO.2
+ */
+ ret = gpio_request(T2_GPIO_2, "T2_GPIO.2");
+ if (ret) {
+ printk(KERN_ERR "failed to get t2_gpio.2\n");
+ goto err_2;
+ }
+ gpio_direction_output(T2_GPIO_2, 0);
+
+ /*
+ * nCAM_VD_SEL (GPIO157)
+ */
+ ret = gpio_request(nCAM_VD_SEL, "cam_vd_sel");
+ if (ret) {
+ printk(KERN_ERR "failed to get cam_vd_sel\n");
+ goto err_3;
+ }
+ gpio_direction_output(nCAM_VD_SEL, 1);
+
+ /*
+ * EXP_nCAM_VD_EN (T2_GPIO.8)
+ */
+ ret = gpio_request(nCAM_VD_EN, "cam_vd_en");
+ if (ret) {
+ printk(KERN_ERR "failed to get cam_vd_en\n");
+ goto err_4;
+ }
+ gpio_direction_output(nCAM_VD_EN, 0);
+
+ ret = gpio_request(TVP5146_DEC_RST, "vid-dec reset");
+ if (ret) {
+ printk(KERN_ERR "failed to get GPIO98_VID_DEC_RES\n");
+ goto err_5;
+ }
+ /* Assert the reset signal */
+ gpio_direction_output(TVP5146_DEC_RST, 0);
+ mdelay(5);
+ gpio_set_value(TVP5146_DEC_RST, 1);
+
+ omap3_init_camera(&omap3evm_isp_platform_data);
+
+ printk(KERN_INFO "omap3evm camera init done successfully...\n");
+ return 0;
+err_5:
+ gpio_free(nCAM_VD_EN);
+err_4:
+ gpio_free(nCAM_VD_SEL);
+err_3:
+ gpio_free(T2_GPIO_2);
+err_2:
+ regulator_put(omap3evm_2v8);
+err_1:
+ regulator_put(omap3evm_1v8);
+
+ return ret;
+}
+
+static void __exit omap3evm_cam_exit(void)
+{
+ gpio_free(nCAM_VD_EN);
+ gpio_free(nCAM_VD_SEL);
+ gpio_free(T2_GPIO_2);
+
+ if (regulator_is_enabled(omap3evm_1v8))
+ regulator_disable(omap3evm_1v8);
+ regulator_put(omap3evm_1v8);
+ if (regulator_is_enabled(omap3evm_2v8))
+ regulator_disable(omap3evm_2v8);
+ regulator_put(omap3evm_2v8);
+}
+
+module_init(omap3evm_cam_init);
+module_exit(omap3evm_cam_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("OMAP3EVM: Driver for TVP5146 module");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index 8333ee4..5c25c86 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -585,6 +585,8 @@ static struct omap_board_mux omap35x_board_mux[] __initdata
= {
OMAP_PIN_OFF_NONE),
OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN |
+ OMAP_PIN_OFF_NONE),
#ifdef CONFIG_WL12XX_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
@@ -610,6 +612,8 @@ static struct omap_board_mux omap36x_board_mux[] __initdata
= {
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLUP |
OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN |
+ OMAP_PIN_OFF_NONE),
/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
diff --git a/include/media/tvp514x.h b/include/media/tvp514x.h
index 74387e8..754b33e 100644
--- a/include/media/tvp514x.h
+++ b/include/media/tvp514x.h
@@ -29,6 +29,8 @@
#ifndef _TVP514X_H
#define _TVP514X_H
+#include <media/v4l2-subdev.h>
+
/*
* Other macros
*/
@@ -104,6 +106,7 @@ enum tvp514x_output {
* @ vs_polarity: VSYNC Polarity configuration for current interface.
*/
struct tvp514x_platform_data {
+ int (*s_power) (struct v4l2_subdev *subdev, u32 on);
/* Interface control params */
bool clk_polarity;
bool hs_polarity;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
