On Saturday, May 28, 2011, Antti Palosaari <cr...@iki.fi> wrote: > On 05/28/2011 04:04 PM, Rémi Denis-Courmont wrote: > > By the way, what is the V4L2 device node supposed to be? I don't suppose the > hardware supports analog nor hardware decoding!? Is it just a left over from > the em28xx driver? > > > Yes. Totally useless for digital only em287x series, em288x is digital + > analog. > > Device hangs if not rmmod drivers before unplug and in my understanding there > is some suspicion it is analog audio. Devin may know more.
Indeed, just never got around to refactoring the driver a bit to not create the video device node for em287x based devices. I did do the work though for the VBI and ALSA nodes. It's actually a bit tricky and there was a risk of a regression due to the GPIO setup, so I have to test it with all the 287x devices before it can go in. The rmmod node has nothing to do with the ALSA stuff. It's a general module dependency problem which Jarod Wilson volunteered to investigate earlier in the week. Devin > regards, > Antti > > -- > http://palosaari.fi/ > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
