Hi, I have a board with empia chipset. The em28xx driver not load, because the device ID is not listed on source(cards.c, i guess). Following bellow have some infos from board: lsusb: Bus 001 Device 004: ID 1b80:e755 Afatech
Opening the device, shows this ic: empia em2888 d351c-195 727-00ag (em28xx) nxp saa7136e/1/g SI5296.1 22 ZSD08411 NXP TDA 18271??C2 HDC2? (tda18271) F JAPAN mb86a20s 0937 M01 E1 (mb86a20s) but... dmesg shows: [18373.454136] usb 6-1: USB disconnect, address 2 [18376.744074] usb 2-1: new high speed USB device using ehci_hcd and address 9 [18376.860283] usb 2-1: New USB device found, idVendor=1b80, idProduct=e755 [18376.860293] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [18376.860300] usb 2-1: Product: USB 2885 Device [18376.860306] usb 2-1: SerialNumber: 1 The em28xx module can handle this device? Thanks, Moa -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
