On Tue, 2011-02-08 at 13:47 +0000, ext Bensaid, Selma wrote: > > > For both configuration we have a set of HCI commands to configure the FM > > audio > > > path and one of my concerns is to know if the wl1273_codec should handle > > > the > > audio path configuration > > > and the switch between FM and BT SCO? > > > > It would be better if the codec could handle the configuration, > > depending on which DAI is in use. If we can send HCI commands from > > kernel, I think that would be the cleanest way. > If we use the Combined Interface Mode (host controls both the BT and FM > radio via BT HCI) this could be possible. However, you use the Separate > Interface (FM controlled vi I2C). > Is there a plan to handle also the Combined Interface Mode for WL1273 FM > Radio driver?
We haven't yet had need for the UART interface but it has been the idea to have them both eventually... Cheers, Matti > > Selma. > > -- > > Péter > --------------------------------------------------------------------- > Intel Corporation SAS (French simplified joint stock company) > Registered headquarters: "Les Montalets"- 2, rue de Paris, > 92196 Meudon Cedex, France > Registration Number: 302 456 199 R.C.S. NANTERRE > Capital: 4,572,000 Euros > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
