Em 19-11-2010 21:43, David Härdeman escreveu:
> Convert boolean variables to use the corresponding data type.
> 
> Signed-off-by: David Härdeman <da...@hardeman.nu>

Waiting for Jarod's comments, but the same comment I made on the previous
patch applies to this one.
> ---
>  drivers/media/rc/mceusb.c |   62 
> +++++++++++++++++++--------------------------
>  1 files changed, 26 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
> index ef9bddc..bb6e2dc 100644
> --- a/drivers/media/rc/mceusb.c
> +++ b/drivers/media/rc/mceusb.c
> @@ -103,9 +103,9 @@
>  
>  /* module parameters */
>  #ifdef CONFIG_USB_DEBUG
> -static int debug = 1;
> +static bool debug = true;
>  #else
> -static int debug;
> +static bool debug;
>  #endif

Not sure if we should convert debug parameter to bool: we may need to have
extra debug levels, or maybe just convert to use dev_dbg(), allowing enabling
them via dynamic_printk.

>  
>  /* general constants */
> @@ -151,12 +151,12 @@ enum mceusb_model_type {
>  };
>  
>  struct mceusb_model {
> -     u32 mce_gen1:1;
> -     u32 mce_gen2:1;
> -     u32 mce_gen3:1;
> -     u32 tx_mask_inverted:1;
> -     u32 is_polaris:1;
> -     u32 no_tx:1;
> +     bool mce_gen1:1;
> +     bool mce_gen2:1;
> +     bool mce_gen3:1;
> +     bool tx_mask_inverted:1;
> +     bool is_polaris:1;
> +     bool no_tx:1;
>  
>       const char *rc_map;     /* Allow specify a per-board map */
>       const char *name;       /* per-board name */
> @@ -164,22 +164,22 @@ struct mceusb_model {
>  
>  static const struct mceusb_model mceusb_model[] = {
>       [MCE_GEN1] = {
> -             .mce_gen1 = 1,
> -             .tx_mask_inverted = 1,
> +             .mce_gen1 = true,
> +             .tx_mask_inverted = true,
>       },
>       [MCE_GEN2] = {
> -             .mce_gen2 = 1,
> +             .mce_gen2 = true,
>       },
>       [MCE_GEN2_TX_INV] = {
> -             .mce_gen2 = 1,
> -             .tx_mask_inverted = 1,
> +             .mce_gen2 = true,
> +             .tx_mask_inverted = true,
>       },
>       [MCE_GEN3] = {
> -             .mce_gen3 = 1,
> -             .tx_mask_inverted = 1,
> +             .mce_gen3 = true,
> +             .tx_mask_inverted = true,
>       },
>       [POLARIS_EVK] = {
> -             .is_polaris = 1,
> +             .is_polaris = true,
>               /*
>                * In fact, the EVK is shipped without
>                * remotes, but we should have something handy,
> @@ -189,8 +189,8 @@ static const struct mceusb_model mceusb_model[] = {
>               .name = "Conexant Hybrid TV (cx231xx) MCE IR",
>       },
>       [CX_HYBRID_TV] = {
> -             .is_polaris = 1,
> -             .no_tx = 1, /* tx isn't wired up at all */
> +             .is_polaris = true,
> +             .no_tx = true, /* tx isn't wired up at all */
>               .name = "Conexant Hybrid TV (cx231xx) MCE IR",
>       },
>  };
> @@ -344,10 +344,10 @@ struct mceusb_dev {
>       u8 cmd, rem;            /* Remaining IR data bytes in packet */
>  
>       struct {
> -             u32 connected:1;
> -             u32 tx_mask_inverted:1;
> -             u32 microsoft_gen1:1;
> -             u32 no_tx:1;
> +             bool connected:1;
> +             bool tx_mask_inverted:1;
> +             bool microsoft_gen1:1;
> +             bool no_tx:1;
>       } flags;
>  
>       /* transmit support */
> @@ -1090,21 +1090,11 @@ static int __devinit mceusb_dev_probe(struct 
> usb_interface *intf,
>       int pipe, maxp, i;
>       char buf[63], name[128] = "";
>       enum mceusb_model_type model = id->driver_info;
> -     bool is_gen3;
> -     bool is_microsoft_gen1;
> -     bool tx_mask_inverted;
> -     bool is_polaris;
>  
>       dev_dbg(&intf->dev, "%s called\n", __func__);
> -
>       idesc  = intf->cur_altsetting;
>  
> -     is_gen3 = mceusb_model[model].mce_gen3;
> -     is_microsoft_gen1 = mceusb_model[model].mce_gen1;
> -     tx_mask_inverted = mceusb_model[model].tx_mask_inverted;
> -     is_polaris = mceusb_model[model].is_polaris;
> -
> -     if (is_polaris) {
> +     if (mceusb_model[model].is_polaris) {
>               /* Interface 0 is IR */
>               if (idesc->desc.bInterfaceNumber)
>                       return -ENODEV;
> @@ -1167,8 +1157,8 @@ static int __devinit mceusb_dev_probe(struct 
> usb_interface *intf,
>       ir->usbdev = dev;
>       ir->dev = &intf->dev;
>       ir->len_in = maxp;
> -     ir->flags.microsoft_gen1 = is_microsoft_gen1;
> -     ir->flags.tx_mask_inverted = tx_mask_inverted;
> +     ir->flags.microsoft_gen1 = mceusb_model[model].mce_gen1;
> +     ir->flags.tx_mask_inverted = mceusb_model[model].tx_mask_inverted;
>       ir->flags.no_tx = mceusb_model[model].no_tx;
>       ir->model = model;
>  
> @@ -1203,7 +1193,7 @@ static int __devinit mceusb_dev_probe(struct 
> usb_interface *intf,
>       /* initialize device */
>       if (ir->flags.microsoft_gen1)
>               mceusb_gen1_init(ir);
> -     else if (!is_gen3)
> +     else if (!mceusb_model[model].mce_gen3)
>               mceusb_gen2_init(ir);
>  
>       mceusb_get_parameters(ir);
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to