That's up to the platform maintainer to review / apply this one, but if
you like, a couple of nit-picks from me:
On Sat, 11 Sep 2010, Janusz Krzysztofik wrote:
> This patch adds support for SoC camera interface to OMAP1 devices.
>
> Created and tested against linux-2.6.36-rc3 on Amstrad Delta.
>
> For successfull compilation, requires a header file provided by PATCH 1/6
> from
> this series, "SoC Camera: add driver for OMAP1 camera interface".
>
> Signed-off-by: Janusz Krzysztofik <jkrzy...@tis.icnet.pl>
> ---
> v1->v2 changes:
> - no functional changes,
> - refreshed against linux-2.6.36-rc3
>
>
> arch/arm/mach-omap1/devices.c | 43
> ++++++++++++++++++++++++++++++
> arch/arm/mach-omap1/include/mach/camera.h | 8 +++++
> 2 files changed, 51 insertions(+)
>
>
> diff -upr linux-2.6.36-rc3.orig/arch/arm/mach-omap1/devices.c
> linux-2.6.36-rc3/arch/arm/mach-omap1/devices.c
> --- linux-2.6.36-rc3.orig/arch/arm/mach-omap1/devices.c 2010-09-03
> 22:29:00.000000000 +0200
> +++ linux-2.6.36-rc3/arch/arm/mach-omap1/devices.c 2010-09-09
> 18:42:30.000000000 +0200
> @@ -15,6 +15,7 @@
> #include <linux/platform_device.h>
> #include <linux/io.h>
> #include <linux/spi/spi.h>
> +#include <linux/dma-mapping.h>
>
> #include <mach/hardware.h>
> #include <asm/mach/map.h>
> @@ -25,6 +26,7 @@
> #include <mach/gpio.h>
> #include <plat/mmc.h>
> #include <plat/omap7xx.h>
> +#include <mach/camera.h>
You might want to try to group headers according to their location, i.e.,
put <mach/...> higher - together with <mach/gpio.h>, also it helps to have
headers alphabetically ordered.
>
> /*-------------------------------------------------------------------------*/
>
> @@ -191,6 +193,47 @@ static inline void omap_init_spi100k(voi
> }
> #endif
>
> +
> +#define OMAP1_CAMERA_BASE 0xfffb6800
> +
> +static struct resource omap1_camera_resources[] = {
> + [0] = {
> + .start = OMAP1_CAMERA_BASE,
> + .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = INT_CAMERA,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct platform_device omap1_camera_device = {
> + .name = "omap1-camera",
> + .id = 0, /* This is used to put cameras on this interface */
> + .dev = {
> + .dma_mask = &omap1_camera_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> + .num_resources = ARRAY_SIZE(omap1_camera_resources),
> + .resource = omap1_camera_resources,
> +};
> +
> +void __init omap1_set_camera_info(struct omap1_cam_platform_data *info)
> +{
> + struct platform_device *dev = &omap1_camera_device;
> + int ret;
> +
> + dev->dev.platform_data = info;
> +
> + ret = platform_device_register(dev);
> + if (ret)
> + dev_err(&dev->dev, "unable to register device: %d\n", ret);
> +}
> +
> +
> /*-------------------------------------------------------------------------*/
>
> static inline void omap_init_sti(void) {}
> diff -upr linux-2.6.36-rc3.orig/arch/arm/mach-omap1/include/mach/camera.h
> linux-2.6.36-rc3/arch/arm/mach-omap1/include/mach/camera.h
> --- linux-2.6.36-rc3.orig/arch/arm/mach-omap1/include/mach/camera.h
> 2010-09-03
> 22:34:03.000000000 +0200
> +++ linux-2.6.36-rc3/arch/arm/mach-omap1/include/mach/camera.h
> 2010-09-09
> 18:42:30.000000000 +0200
> @@ -0,0 +1,8 @@
> +#ifndef __ASM_ARCH_CAMERA_H_
> +#define __ASM_ARCH_CAMERA_H_
> +
> +#include <media/omap1_camera.h>
> +
> +extern void omap1_set_camera_info(struct omap1_cam_platform_data *);
function declarations don't need an "extern" - something I've also been
doing needlessly for a few years...
> +
> +#endif /* __ASM_ARCH_CAMERA_H_ */
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
