Hi Dmitri,
Dmitri Belimov wrote:
> Hi
>
> Rework last I2C patch.
> Set correct limit for I2C packet.
> Use different method for the tm5600/tm6000 and tm6010 to read word.
>
> Try this patch.
>
> diff -r 7c0b887911cf linux/drivers/staging/tm6000/tm6000-i2c.c
> --- a/linux/drivers/staging/tm6000/tm6000-i2c.c Mon Apr 05 22:56:43
> 2010 -0400
> +++ b/linux/drivers/staging/tm6000/tm6000-i2c.c Mon Apr 26 04:15:56
> 2010 +1000
> @@ -24,6 +24,7 @@
> #include <linux/kernel.h>
> #include <linux/usb.h>
> #include <linux/i2c.h>
> +#include <linux/delay.h>
You probably don't need this.
>
> #include "compat.h"
> #include "tm6000.h"
> @@ -45,11 +46,49 @@
> printk(KERN_DEBUG "%s at %s: " fmt, \
> dev->name, __FUNCTION__ , ##args); } while (0)
>
> +static void tm6000_i2c_reset(struct tm6000_core *dev)
> +{
> + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0);
> + msleep(15);
> + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1);
> + msleep(15);
> +}
> +
> static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr,
> __u8 reg, char *buf, int len)
> {
> - return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
> USB_RECIP_DEVICE,
> - REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len);
> + int rc;
> + unsigned int tsleep;
> + unsigned int i2c_packet_limit = 16;
> +
> + if (dev->dev_type == TM6010)
> + i2c_packet_limit = 64;
> +
> + if (!buf)
> + return -1;
> +
> + if (len < 1 || len > i2c_packet_limit){
> + printk("Incorrect lenght of i2c packet = %d, limit set to %d\n",
> + len, i2c_packet_limit);
> + return -1;
> + }
> +
> + /* capture mutex */
> + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
> + addr | reg << 8, 0, buf, len);
> +
> + if (rc < 0) {
> + /* release mutex */
> + return rc;
> + }
> +
> + /* Calculate delay time, 14000us for 64 bytes */
> + tsleep = ((len * 200) + 200 + 1000) / 1000;
> + msleep(tsleep);
> +
> + /* release mutex */
> + return rc;
> }
>
> /* Generic read - doesn't work fine with 16bit registers */
> @@ -58,23 +97,41 @@
> {
> int rc;
> u8 b[2];
> + unsigned int i2c_packet_limit = 16;
>
> - if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg %
> 2 == 0)) {
> + if (dev->dev_type == TM6010)
> + i2c_packet_limit = 64;
> +
> + if (!buf)
> + return -1;
> +
> + if (len < 1 || len > i2c_packet_limit){
> + printk("Incorrect lenght of i2c packet = %d, limit set to %d\n",
> + len, i2c_packet_limit);
> + return -1;
> + }
> +
> + /* capture mutex */
> + if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr)
> + && (reg % 2 == 0)) {
> /*
> * Workaround an I2C bug when reading from zl10353
> */
> reg -= 1;
> len += 1;
>
> - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> USB_RECIP_DEVICE,
> - REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len);
> + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
> + addr | reg << 8, 0, b, len);
>
> *buf = b[1];
> } else {
> - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> USB_RECIP_DEVICE,
> - REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf,
> len);
> + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
> + addr | reg << 8, 0, buf, len);
> }
>
> + /* release mutex */
> return rc;
> }
>
> @@ -85,8 +142,137 @@
> static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char
> addr,
> __u16 reg, char *buf, int len)
> {
> - return tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> USB_RECIP_DEVICE,
> - REQ_14_SET_GET_I2C_WR2_RDN, addr, reg, buf, len);
> + int rc;
> + unsigned char ureg;
> +
> + if (!buf || len != 2)
> + return -1;
> +
> + /* capture mutex */
> + if (dev->dev_type == TM6010){
> + ureg = reg & 0xFF;
> + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
> + addr | (reg & 0xFF00), 0, &ureg, 1);
> +
> + if (rc < 0) {
> + /* release mutex */
> + return rc;
> + }
> +
> + msleep(1400 / 1000);
> + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
> + reg, 0, buf, len);
> + }
> + else {
> + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN,
> + addr, reg, buf, len);
> + }
> +
> + /* release mutex */
> + return rc;
> +}
> +
> +static int tm6000_i2c_read_sequence(struct tm6000_core *dev, unsigned char
> addr,
> + __u16 reg, char *buf, int len)
> +{
> + int rc;
> +
> + if (dev->dev_type != TM6010)
> + return -1;
> +
> + if (!buf)
> + return -1;
> +
> + if (len < 1 || len > 64){
> + printk("Incorrect lenght of i2c packet = %d, limit set to 64\n",
> + len);
> + return -1;
> + }
> +
> + /* capture mutex */
> + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ,
> + reg, 0, buf, len);
> + /* release mutex */
> + return rc;
> +}
> +
> +static int tm6000_i2c_write_sequence(struct tm6000_core *dev,
> + unsigned char addr, __u16 reg, char *buf,
> + int len)
> +{
> + int rc;
> + unsigned int tsleep;
> + unsigned int i2c_packet_limit = 16;
> +
> + if (dev->dev_type == TM6010)
> + i2c_packet_limit = 64;
> +
> + if (!buf)
> + return -1;
> +
> + if (len < 1 || len > i2c_packet_limit){
> + printk("Incorrect lenght of i2c packet = %d, limit set to %d\n",
> + len, i2c_packet_limit);
> + return -1;
> + }
> +
> + /* capture mutex */
> + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN,
> + addr | reg << 8, 0, buf+1, len-1);
> +
> + if (rc < 0) {
> + /* release mutex */
> + return rc;
> + }
> +
> + /* Calculate delay time, 13800us for 64 bytes */
> + tsleep = ((len * 200) + 1000) / 1000;
> + msleep(tsleep);
> +
> + /* release mutex */
> + return rc;
> +}
> +
> +static int tm6000_i2c_write_uni(struct tm6000_core *dev, unsigned char addr,
> + __u16 reg, char *buf, int len)
> +{
> + int rc;
> + unsigned int tsleep;
> + unsigned int i2c_packet_limit = 16;
> +
> + if (dev->dev_type == TM6010)
> + i2c_packet_limit = 64;
> +
> + if (!buf)
> + return -1;
> +
> + if (len < 1 || len > i2c_packet_limit){
> + printk("Incorrect lenght of i2c packet = %d, limit set to %d\n",
> + len, i2c_packet_limit);
> + return -1;
> + }
> +
> + /* capture mutex */
> + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
> + USB_RECIP_DEVICE, REQ_30_I2C_WRITE,
> + addr | reg << 8, 0, buf+1, len-1);
> +
> + if (rc < 0) {
> + /* release mutex */
> + return rc;
> + }
> +
> + /* Calculate delay time, 14800us for 64 bytes */
> + tsleep = ((len * 200) + 1000 + 1000) / 1000;
> + msleep(tsleep);
> +
> + /* release mutex */
> + return rc;
> }
There are some troubles here that I noticed on your first patch: you're
adding some new functions that aren't used on the code, generating some
warnings. Please remove them or use.
>
> static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
>
>
> With my best regards, Dmitry.
>
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
