Am 19.02.2010 17:07, schrieb Patch from Mauro Carvalho Chehab:
> }
>
> div = (freq - offset + DIV / 2) / DIV;
> @@ -1114,17 +1152,22 @@ static int xc2028_set_params(struct dvb_frontend *fe,
>
> /* All S-code tables need a 200kHz shift */
> if (priv->ctrl.demod) {
> - demod = priv->ctrl.demod + 200;
> + /*
> + * Newer firmwares require a 200 kHz offset only for ATSC
> + */
> + if (type == ATSC || priv->firm_version < 0x0302)
> + demod = priv->ctrl.demod + 200;
> /*
> * The DTV7 S-code table needs a 700 kHz shift.
> - * Thanks to Terry Wu <terrywu2...@gmail.com> for reporting this
> *
> * DTV7 is only used in Australia. Germany or Italy may also
> * use this firmware after initialization, but a tune to a UHF
> * channel should then cause DTV78 to be used.
> + *
> + * Unfortunately, on real-field tests, the s-code offset
> + * didn't work as expected, as reported by
> + * Robert Lowery <rglow...@exemail.com.au>
> */
> - if (type & DTV7)
> - demod += 500;
> }
>
> return generic_set_freq(fe, p->frequency,
>
Hi Mauro,
your patch doesn't work. Here is not set demod for all others (demod=0).
--
Stefan Ringel <stefan.rin...@arcor.de>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
