> Robert Lowery wrote:
>> Mauro,
>>
>> I had to make 2 changes to get the patch to work for me
>
> Ok. Please test this (hopefully) final revision.
This version works for me
>
> --
>
> commit bd8bb8798bb96136b6898186d505c9e154334b5d
> Author: Mauro Carvalho Chehab <mche...@redhat.com>
> Date: Fri Feb 19 02:45:00 2010 -0200
>
> V4L/DVB: tuner-xc2028: fix tuning logic
>
> There's one reported regression in Australia (DTV7) and some
> reported troubles with newer firmwares. Rework the logic to improve
> tuner on those cases.
>
> Thanks-to: Robert Lowery <rglow...@exemail.com.au>
> Thanks-to: Stefan Ringel <stefan.rin...@arcor.de>
> Signed-off-by: Mauro Carvalho Chehab <mche...@redhat.com>
>
> diff --git a/drivers/media/common/tuners/tuner-xc2028.c
> b/drivers/media/common/tuners/tuner-xc2028.c
> index ed50168..ef61815 100644
> --- a/drivers/media/common/tuners/tuner-xc2028.c
> +++ b/drivers/media/common/tuners/tuner-xc2028.c
> @@ -932,30 +932,52 @@ static int generic_set_freq(struct dvb_frontend *fe,
> u32 freq /* in HZ */,
> * that xc2028 will be in a safe state.
> * Maybe this might also be needed for DTV.
> */
> - if (new_mode == T_ANALOG_TV)
> + if (new_mode == T_ANALOG_TV) {
> rc = send_seq(priv, {0x00, 0x00});
>
> - /*
> - * Digital modes require an offset to adjust to the
> - * proper frequency.
> - * Analog modes require offset = 0
> - */
> - if (new_mode == T_DIGITAL_TV) {
> - /* Sets the offset according with firmware */
> + /* Analog modes require offset = 0 */
> + } else {
> + /*
> + * Digital modes require an offset to adjust to the
> + * proper frequency. The offset depends on what
> + * firmware version is used.
> + */
> +
> + /*
> + * Adjust to the center frequency. This is calculated by the
> + * formula: offset = 1.25MHz - BW/2
> + * For DTV 7/8, the firmware uses BW = 8000, so it needs a
> + * further adjustment to get the frequency center on VHF
> + */
> if (priv->cur_fw.type & DTV6)
> offset = 1750000;
> else if (priv->cur_fw.type & DTV7)
> offset = 2250000;
> else /* DTV8 or DTV78 */
> offset = 2750000;
> + if ((priv->cur_fw.type & DTV78) && freq < 470000000)
> + offset -= 500000;
>
> /*
> - * We must adjust the offset by 500kHz when
> - * tuning a 7MHz VHF channel with DTV78 firmware
> - * (used in Australia, Italy and Germany)
> + * xc3028 additional "magic"
> + * Depending on the firmware version, it needs some adjustments
> + * to properly centralize the frequency. This seems to be
> + * needed to compensate the SCODE table adjustments made by
> + * newer firmwares
> */
> - if ((priv->cur_fw.type & DTV78) && freq < 470000000)
> - offset -= 500000;
> +
> + if (priv->firm_version < 0x0302) {
> + if (priv->cur_fw.type & DTV7)
> + offset += 500000;
> +#if 0
> + /* Still need some tests */
> + } else {
> + if (priv->cur_fw.type & DTV7)
> + offset -= 300000;
> + else if (type != ATSC) /* DVB @6MHz, DTV 8 and DTV 7/8
> */
> + offset += 200000;
> +#endif
> + }
> }
>
> div = (freq - offset + DIV / 2) / DIV;
> @@ -1114,17 +1136,22 @@ static int xc2028_set_params(struct dvb_frontend
> *fe,
>
> /* All S-code tables need a 200kHz shift */
> if (priv->ctrl.demod) {
> - demod = priv->ctrl.demod + 200;
> + /*
> + * Newer firmwares require a 200 kHz offset only for ATSC
> + */
> + if (type == ATSC || priv->firm_version < 0x0302)
> + demod = priv->ctrl.demod + 200;
> /*
> * The DTV7 S-code table needs a 700 kHz shift.
> - * Thanks to Terry Wu <terrywu2...@gmail.com> for reporting this
> *
> * DTV7 is only used in Australia. Germany or Italy may also
> * use this firmware after initialization, but a tune to a UHF
> * channel should then cause DTV78 to be used.
> + *
> + * Unfortunately, on real-field tests, the s-code offset
> + * didn't work as expected, as reported by
> + * Robert Lowery <rglow...@exemail.com.au>
> */
> - if (type & DTV7)
> - demod += 500;
> }
>
> return generic_set_freq(fe, p->frequency,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
