I have this stick running on my Mythtv box with the patch and a quick hack to disable the additional calibrations. It works, most of the time, but will occasionally stop working until I reboot. The frequency of this is reduced if I tell Mythbackend to only grab the tuner when it needs it... might be a calibration issue, might be marginal hardware overheating.
-R C On Tue, Feb 9, 2010 at 5:16 PM, Amy Overmyer <aove...@yahoo.com> wrote: > I have one of these devices. It works OK in windows, but I'd like to stick it > on my myth backend as a 3rd tuner, just in case. I'm using it for 8VSB OTA. I > took a patch put forth a while back on this list and was able to put that on > the kernel 2.6.31.6. I am able to tune and lock channels with it, but, like > the people earlier, I see the RF tracking filter calibration in the syslogs > and tuning takes some time. > > Is there anything I can do to debug this? I'm a programmer by trade (err my > systems are usually a bit more special purpose than a linux box as I'm an > embedded systems type guy, but it's all bits anyway), so don't be afraid to > suggest code changes or point me in a direction. > > Thanks, > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
