On 9/24/19 4:17 PM, Jiunn Chang wrote:
> Tuner step increment/decrement will select the next highest or next
> lowest service frequency. There are a total of three possible
> frequencies from analog_freqs_khz given a broadcast type and system.
>
> Opcodes implemented:
> - <Tuner Step Increment>
> - <Tuner Step Decrement>
>
> Signed-off-by: Jiunn Chang <c0d1n61...@gmail.com>
> ---
> utils/cec-follower/cec-tuner.cpp | 49 ++++++++++++++++++++++++++++++--
> 1 file changed, 46 insertions(+), 3 deletions(-)
>
> diff --git a/utils/cec-follower/cec-tuner.cpp
> b/utils/cec-follower/cec-tuner.cpp
> index acc3fd00..adb2f63c 100644
> --- a/utils/cec-follower/cec-tuner.cpp
> +++ b/utils/cec-follower/cec-tuner.cpp
> @@ -135,6 +135,22 @@ static bool analog_set_tuner_dev_info(struct node *node,
> struct cec_msg *msg)
> return false;
> }
>
> +static int analog_find_freq_index(struct cec_op_tuner_device_info *info)
> +{
> + if (info->analog.ana_freq == 0)
> + return -1;
Can this ever be 0? With the current emulation code this cannot happen, I think.
I'd drop this check.
> +
> + int ana_freq_khz = (info->analog.ana_freq * 625) / 10;
> +
> + for (int i = 0; i < NUM_ANALOG_FREQS; i++) {
> + int freq =
> analog_freqs_khz[info->analog.ana_bcast_type][info->analog.bcast_system][i];
> +
> + if (ana_freq_khz == freq)
> + return i;
> + }
> + return -1;
If it can't be found, just return 0. Again, this can't happen with the current
code.
> +}
> +
> void process_tuner_record_timer_msgs(struct node *node, struct cec_msg &msg,
> unsigned me)
> {
> bool is_bcast = cec_msg_is_broadcast(&msg);
> @@ -178,12 +194,39 @@ void process_tuner_record_timer_msgs(struct node *node,
> struct cec_msg &msg, uns
> return;
>
> case CEC_MSG_SELECT_DIGITAL_SERVICE:
> - case CEC_MSG_TUNER_STEP_DECREMENT:
> - case CEC_MSG_TUNER_STEP_INCREMENT:
> - if (!cec_has_tuner(1 << me))
> + case CEC_MSG_TUNER_STEP_DECREMENT: {
> + if (!cec_has_tuner(1 << me) && !cec_has_tv(1 << me))
> break;
> +
> + struct cec_op_tuner_device_info *info =
> &node->state.tuner_dev_info;
> + int idx = analog_find_freq_index(info);
> +
> + if (idx == -1 || idx == 0)
If idx == 0, then just wrap around to the highest index. That's what typically
happens
when you press Previous Channel on the TV's remote as well.
> + return;
> + if (info->is_analog) {
> + int freq =
> analog_freqs_khz[info->analog.ana_bcast_type][info->analog.bcast_system][--idx];
> +
> + info->analog.ana_freq = (freq * 10) / 625;
> + }
> return;
> + }
> +
> + case CEC_MSG_TUNER_STEP_INCREMENT: {
> + if (!cec_has_tuner(1 << me) && !cec_has_tv(1 << me))
> + break;
>
> + struct cec_op_tuner_device_info *info =
> &node->state.tuner_dev_info;
> + int idx = analog_find_freq_index(info);
> +
> + if (idx == -1 || idx == 2)
Same here, just wrap around to 0. And don't use 2, use the NUM_ANALOG_FREQS
define.
> + return;
> + if (info->is_analog) {
> + int freq =
> analog_freqs_khz[info->analog.ana_bcast_type][info->analog.bcast_system][++idx];
> +
> + info->analog.ana_freq = (freq * 10) / 625;
> + }
> + return;
> + }
>
> /*
> One Touch Record
>
Regards,
Hans
