Hi Flavius,
Please make sure you label your patch with sequentially increasing versions.
I think the last one was v3 and there is no v4.
On Thu, Sep 19, 2019 at 06:13:58PM +0300, Flavius Georgescu wrote:
> The device it's an iMON UltraBay (0x98 in config byte) with LCD,
> IR and dual-knobs front panel.
>
> To work properly the device also require its own key table,
> and repeat suppression for all buttons.
>
> Signed-off-by: Flavius Georgescu <pretoriano...@gmail.com>
> Co-developed-by: Chris Vandomelen <ch...@sightworks.com>
> Signed-off-by: Chris Vandomelen <ch...@sightworks.com>
> ---
> drivers/media/rc/imon.c | 46 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
> index 37a850421fbb..17141d57e311 100644
> --- a/drivers/media/rc/imon.c
> +++ b/drivers/media/rc/imon.c
> @@ -83,6 +83,7 @@ struct imon_usb_dev_descr {
> __u16 flags;
> #define IMON_NO_FLAGS 0
> #define IMON_NEED_20MS_PKT_DELAY 1
> +#define IMON_SUPPRESS_REPEATED_KEYS 2
> struct imon_panel_key_table key_table[];
> };
>
> @@ -315,6 +316,32 @@ static const struct imon_usb_dev_descr imon_DH102 = {
> }
> };
>
> +/* imon ultrabay front panel key table */
> +static const struct imon_usb_dev_descr ultrabay_table = {
> + .flags = IMON_SUPPRESS_REPEATED_KEYS,
> + .key_table = {
> + { 0x0000000f0000ffeell, KEY_MEDIA }, /* Go */
> + { 0x000000000100ffeell, KEY_UP },
> + { 0x000000000001ffeell, KEY_DOWN },
> + { 0x000000160000ffeell, KEY_ENTER },
> + { 0x0000001f0000ffeell, KEY_AUDIO }, /* Music */
> + { 0x000000200000ffeell, KEY_VIDEO }, /* Movie */
> + { 0x000000210000ffeell, KEY_CAMERA }, /* Photo */
> + { 0x000000270000ffeell, KEY_DVD },
> + { 0x000000230000ffeell, KEY_TV },
> + { 0x000000050000ffeell, KEY_PREVIOUS },
> + { 0x000000070000ffeell, KEY_REWIND },
> + { 0x000000040000ffeell, KEY_STOP },
> + { 0x000000020000ffeell, KEY_PLAYPAUSE },
> + { 0x000000080000ffeell, KEY_FASTFORWARD },
> + { 0x000000060000ffeell, KEY_NEXT },
> + { 0x000100000000ffeell, KEY_VOLUMEUP },
> + { 0x010000000000ffeell, KEY_VOLUMEDOWN },
> + { 0x000000010000ffeell, KEY_MUTE },
> + { 0, KEY_RESERVED },
> + }
> +};
> +
> /*
> * USB Device ID for iMON USB Control Boards
> *
> @@ -1661,6 +1688,17 @@ static void imon_incoming_packet(struct imon_context
> *ictx,
> return;
> }
> }
> + /* KEY repeats from knob need to be suppressed */
> + if (ictx->dev_descr->flags & IMON_SUPPRESS_REPEATED_KEYS) {
> + if (ictx->kc == ictx->last_keycode) {
> + msec = ktime_ms_delta(t, prev_time);
> + if (msec < ictx->idev->rep[REP_DELAY]) {
> + spin_unlock_irqrestore(&ictx->kc_lock, flags);
> + return;
> + }
> + }
> + }
This can probably be merged with previous statement. Also, the nested ifs
can be shorted with &&.
if (itc->kc == KEY_MUTE ||
ictx->dev_descr->flags & IMON_SUPPRESS_REPEATED_KEYS) {
if (ictx->kc == ictx->last_keycode &&
ktime_ms_delta(t, prev_time) < ictx->idev->rep[REP_DELAY]) {
spin_unlock_irqrestore(&ictx->kc_lock, flags);
return;
}
}
Something like that a least. No need for the msec variable.
> +
> prev_time = t;
> kc = ictx->kc;
>
> @@ -1848,6 +1886,14 @@ static void imon_get_ffdc_type(struct imon_context
> *ictx)
> dev_info(ictx->dev, "0xffdc iMON Inside, iMON IR");
> ictx->display_supported = false;
> break;
> + /* Soundgraph iMON UltraBay */
> + case 0x98:
> + dev_info(ictx->dev, "0xffdc iMON UltraBay, LCD + IR");
> + detected_display_type = IMON_DISPLAY_TYPE_LCD;
> + allowed_protos = RC_PROTO_BIT_IMON | RC_PROTO_BIT_RC6_MCE;
> + ictx->dev_descr = (struct imon_usb_dev_descr *) &ultrabay_table;
No cast needed here (I think).
> + break;
> +
> default:
> dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD
> and iMON IR");
> detected_display_type = IMON_DISPLAY_TYPE_VFD;
> --
> 2.20.1
