From: Jan Pieter van Woerkom <j...@jpvw.nl>
Adds support for the "Mygica T230C v2" into the "dvbsky" driver.
A small enhancement is also needed in the si2168 demodulator
driver, and a USB device ID in dvb-usb-ids.h .
This is v4 of the proposed patch, based on feedback from Sean
Young and Antti Palosaari.
Tested by patch author: can tune into DVB-(T/T2/C) muxes, AV
playback & data all work.
Tested by Frank Rysanek: can tune into locally available DVB-T
and DVB-T2 muxes, video and audio playback works.
Applies cleanly against Linux 5.1.* .
The T230C v2 hardware needs a mode of the si2168 chip to be set
for which the si2168 driver previously had no support. This patch
uses a specific measure to configure this on the T230C v2 hardware
only - see the flag passed via the ts_clk_special attribute and
its dependency on USB_PID_MYGICA_T230C2. Other devices using the
si2168 demodulator driver are not affected in any way.
Signed-off-by: Jan Pieter van Woerkom <j...@jpvw.nl>
Tested-by: Frank Rysanek <frantisek.rysa...@post.cz>
---
diff -ru a/drivers/media/dvb-frontends/si2168.c
b/drivers/media/dvb-frontends/si2168.c
--- a/drivers/media/dvb-frontends/si2168.c 2019-07-03 13:13:45.000000000
+0200
+++ b/drivers/media/dvb-frontends/si2168.c 2019-07-07 23:33:06.186303149
+0200
@@ -91,8 +91,20 @@
dev_dbg(&client->dev, "%s acquire: %d\n", __func__, acquire);
+ /* set ts clock freq to 10Mhz */
+ if (dev->ts_clk_special) {
+ memcpy(cmd.args, "\x14\x00\x0d\x10\xe8\x03", 6);
+ cmd.wlen = 6;
+ cmd.rlen = 4;
+ ret = si2168_cmd_execute(client, &cmd);
+ if (ret)
+ return ret;
+ }
+
/* set TS_MODE property */
memcpy(cmd.args, "\x14\x00\x01\x10\x10\x00", 6);
+ if (dev->ts_clk_special)
+ cmd.args[4] = 0x20;
if (acquire)
cmd.args[4] |= dev->ts_mode;
else
@@ -804,6 +816,7 @@
*config->i2c_adapter = dev->muxc->adapter[0];
*config->fe = &dev->fe;
dev->ts_mode = config->ts_mode;
+ dev->ts_clk_special = config->ts_clk_special;
dev->ts_clock_inv = config->ts_clock_inv;
dev->ts_clock_gapped = config->ts_clock_gapped;
dev->spectral_inversion = config->spectral_inversion;
diff -ru a/drivers/media/dvb-frontends/si2168.h
b/drivers/media/dvb-frontends/si2168.h
--- a/drivers/media/dvb-frontends/si2168.h 2019-07-03 13:13:45.000000000
+0200
+++ b/drivers/media/dvb-frontends/si2168.h 2019-07-07 23:35:27.111462066
+0200
@@ -40,6 +40,7 @@
#define SI2168_TS_SERIAL 0x03
#define SI2168_TS_TRISTATE 0x00
u8 ts_mode;
+ bool ts_clk_special;
/* TS clock inverted */
bool ts_clock_inv;
diff -ru a/drivers/media/dvb-frontends/si2168_priv.h
b/drivers/media/dvb-frontends/si2168_priv.h
--- a/drivers/media/dvb-frontends/si2168_priv.h 2019-07-03 13:13:45.000000000
+0200
+++ b/drivers/media/dvb-frontends/si2168_priv.h 2019-07-07 23:36:34.726130136
+0200
@@ -46,6 +46,7 @@
bool active;
bool warm;
u8 ts_mode;
+ bool ts_clk_special;
bool ts_clock_inv;
bool ts_clock_gapped;
bool spectral_inversion;
