Hi Fabio,
On Wed, Jun 26, 2019 at 08:56:14PM -0300, Fabio Estevam wrote:
> The code can be simplified by using the regulator_bulk() functions,
> so switch to it.
>
> Signed-off-by: Fabio Estevam <feste...@gmail.com>
> ---
> drivers/media/i2c/ov5645.c | 94 +++++++++-----------------------------
> 1 file changed, 21 insertions(+), 73 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index 4e302dc15177..a37ae5d5ff12 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -58,6 +58,15 @@
> #define OV5645_SDE_SAT_U 0x5583
> #define OV5645_SDE_SAT_V 0x5584
>
> +/* regulator supplies */
> +static const char * const ov5645_supply_name[] = {
> + "vdddo", /* Digital I/O (1.8V) supply */
> + "vddd", /* Digital Core (1.5V) supply */
> + "vdda", /* Analog (2.8V) supply */
> +};
> +
> +#define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name)
> +
> struct reg_value {
> u16 reg;
> u8 val;
> @@ -82,9 +91,7 @@ struct ov5645 {
> struct v4l2_rect crop;
> struct clk *xclk;
>
> - struct regulator *io_regulator;
> - struct regulator *core_regulator;
> - struct regulator *analog_regulator;
> + struct regulator_bulk_data supplies[OV5645_NUM_SUPPLIES];
>
> const struct ov5645_mode_info *current_mode;
>
> @@ -529,55 +536,6 @@ static const struct ov5645_mode_info
> ov5645_mode_info_data[] = {
> },
> };
>
> -static int ov5645_regulators_enable(struct ov5645 *ov5645)
> -{
> - int ret;
> -
> - ret = regulator_enable(ov5645->io_regulator);
> - if (ret < 0) {
> - dev_err(ov5645->dev, "set io voltage failed\n");
> - return ret;
> - }
> -
> - ret = regulator_enable(ov5645->analog_regulator);
> - if (ret) {
> - dev_err(ov5645->dev, "set analog voltage failed\n");
> - goto err_disable_io;
> - }
> -
> - ret = regulator_enable(ov5645->core_regulator);
> - if (ret) {
> - dev_err(ov5645->dev, "set core voltage failed\n");
> - goto err_disable_analog;
> - }
This appears to change the order in which the regulators are enabled. Is
that intentional? Does the sensor support this order as well?
> -
> - return 0;
> -
> -err_disable_analog:
> - regulator_disable(ov5645->analog_regulator);
> -err_disable_io:
> - regulator_disable(ov5645->io_regulator);
> -
> - return ret;
> -}
> -
> -static void ov5645_regulators_disable(struct ov5645 *ov5645)
> -{
> - int ret;
> -
> - ret = regulator_disable(ov5645->core_regulator);
> - if (ret < 0)
> - dev_err(ov5645->dev, "core regulator disable failed\n");
> -
> - ret = regulator_disable(ov5645->analog_regulator);
> - if (ret < 0)
> - dev_err(ov5645->dev, "analog regulator disable failed\n");
> -
> - ret = regulator_disable(ov5645->io_regulator);
> - if (ret < 0)
> - dev_err(ov5645->dev, "io regulator disable failed\n");
> -}
> -
> static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val)
> {
> u8 regbuf[3];
> @@ -676,15 +634,14 @@ static int ov5645_set_power_on(struct ov5645 *ov5645)
> {
> int ret;
>
> - ret = ov5645_regulators_enable(ov5645);
> - if (ret < 0) {
> + ret = regulator_bulk_enable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> + if (ret < 0)
> return ret;
> - }
>
> ret = clk_prepare_enable(ov5645->xclk);
> if (ret < 0) {
> dev_err(ov5645->dev, "clk prepare enable failed\n");
> - ov5645_regulators_disable(ov5645);
> + regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> return ret;
> }
>
> @@ -704,7 +661,7 @@ static void ov5645_set_power_off(struct ov5645 *ov5645)
> gpiod_set_value_cansleep(ov5645->rst_gpio, 1);
> gpiod_set_value_cansleep(ov5645->enable_gpio, 0);
> clk_disable_unprepare(ov5645->xclk);
> - ov5645_regulators_disable(ov5645);
> + regulator_bulk_disable(OV5645_NUM_SUPPLIES, ov5645->supplies);
> }
>
> static int ov5645_s_power(struct v4l2_subdev *sd, int on)
> @@ -1089,6 +1046,7 @@ static int ov5645_probe(struct i2c_client *client,
> struct device_node *endpoint;
> struct ov5645 *ov5645;
> u8 chip_id_high, chip_id_low;
> + unsigned int i;
> u32 xclk_freq;
> int ret;
>
> @@ -1146,23 +1104,13 @@ static int ov5645_probe(struct i2c_client *client,
> return ret;
> }
>
> - ov5645->io_regulator = devm_regulator_get(dev, "vdddo");
> - if (IS_ERR(ov5645->io_regulator)) {
> - dev_err(dev, "cannot get io regulator\n");
> - return PTR_ERR(ov5645->io_regulator);
> - }
> -
> - ov5645->core_regulator = devm_regulator_get(dev, "vddd");
> - if (IS_ERR(ov5645->core_regulator)) {
> - dev_err(dev, "cannot get core regulator\n");
> - return PTR_ERR(ov5645->core_regulator);
> - }
> + for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
> + ov5645->supplies[i].supply = ov5645_supply_name[i];
>
> - ov5645->analog_regulator = devm_regulator_get(dev, "vdda");
> - if (IS_ERR(ov5645->analog_regulator)) {
> - dev_err(dev, "cannot get analog regulator\n");
> - return PTR_ERR(ov5645->analog_regulator);
> - }
> + ret = devm_regulator_bulk_get(dev, OV5645_NUM_SUPPLIES,
> + ov5645->supplies);
> + if (ret < 0)
> + return ret;
>
> ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
> if (IS_ERR(ov5645->enable_gpio)) {
--
Regards,
Sakari Ailus
