Add nodes for Mediatek's sensor interface device. Sensor interface module
embedded in Mediatek SOCs, works as a HW camera interface controller
intended for image and data transmission between cameras and host devices.
Signed-off-by: Louis Kuo <louis....@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 34 ++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c3a516e..2fe97e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -474,4 +474,38 @@
#clock-cells = <1>;
};
};
+
+ seninf: seninf@1a040000 {
+ compatible = "mediatek,mt8183-seninf";
+ reg = <0 0x1a040000 0 0x8000>,
+ <0 0x11C80000 0 0x6000>;
+ reg-names = "base_reg", "rx_reg";
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+ clocks =
+ <&camsys CLK_CAM_SENINF>,
+ <&topckgen CLK_TOP_MUX_SENINF>;
+ clock-names =
+ "CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF";
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ mipi_in_cam0: endpoint@0 {
+ reg = <0>;
+ data-lanes = <1 3>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mipi_in_cam1: endpoint@0 {
+ reg = <1>;
+ data-lanes = <1 3>;
+ };
+ };
+ };
+ };
};
--
1.9.1
