Hi Frederic,
Thanks for the patchset.
Could you also cc the devicetree list, please?
On Fri, Feb 01, 2019 at 07:21:27PM +0800, Frederic Chen wrote:
> This patch adds the DT binding documentation for the shared memory
> between DIP (Digital Image Processing) unit of the camera ISP system
> and the co-processor in Mediatek SoCs.
>
> Signed-off-by: Frederic Chen <frederic.c...@mediatek.com>
> ---
> .../bindings/media/mediatek,dip_smem.txt | 29
> ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/media/mediatek,dip_smem.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,dip_smem.txt
> b/Documentation/devicetree/bindings/media/mediatek,dip_smem.txt
> new file mode 100644
> index 0000000..5533721
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,dip_smem.txt
> @@ -0,0 +1,29 @@
> +Mediatek ISP Shared Memory Device
> +
> +Mediatek ISP Shared Memory Device is used to manage shared memory
> +among CPU, ISP IPs and coprocessor. It is associated with a reserved
> +memory region (Please see Documentation\devicetree\bindings\
> +reserved-memory\mediatek,reserve-memory-isp_smem.txt) and
s/\\/\//g;
> +and provide the context to allocate memory with dma addresses.
> +
> +Required properties:
> +- compatible: Should be "mediatek,isp_smem"
s/Should/Shall/
> +
> +- iommus: should point to the respective IOMMU block with master port
s/should/shall/
> + as argument. Please set the ports which may be accessed
> + through the common path. You can see
> + Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> + for the detail.
> +
> +- mediatek,larb: must contain the local arbiters in the current Socs.
Perhaps "SoCs"?
> + Please set the larb of camsys for Pass 1 and imgsys for DIP, or both
> + if you are using all the camera function. You can see
> + Documentation/devicetree/bindings/memory-controllers/
> + mediatek,smi-larb.txt for the detail.
> +
> +Example:
> + isp_smem: isp_smem {
> + compatible = "mediatek,isp_smem";
> + mediatek,larb = <&larb5>;
> + iommus = <&iommu M4U_PORT_CAM_IMGI>;
> + };
--
Kind regards,
Sakari Ailus
