Signed-off-by: Sean Young <s...@mess.org>
---
utils/ir-ctl/ir-ctl.1.in | 2 +-
utils/ir-ctl/ir-ctl.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/utils/ir-ctl/ir-ctl.1.in b/utils/ir-ctl/ir-ctl.1.in
index 2a148c70..10d4d594 100644
--- a/utils/ir-ctl/ir-ctl.1.in
+++ b/utils/ir-ctl/ir-ctl.1.in
@@ -54,7 +54,7 @@ Use the wideband receiver if available on the hardware. This
is also
known as learning mode. The measurements should be more precise and any
carrier frequency should be accepted.
.TP
-\fB\-n\fR, \fB\-\-no-wideband\fR
+\fB\-n\fR, \fB\-\-narrowband\fR
Switches back to the normal, narrowband receiver if the wideband receiver
was enabled.
.TP
diff --git a/utils/ir-ctl/ir-ctl.c b/utils/ir-ctl/ir-ctl.c
index ddd93068..dcc9439c 100644
--- a/utils/ir-ctl/ir-ctl.c
+++ b/utils/ir-ctl/ir-ctl.c
@@ -109,7 +109,7 @@ static const struct argp_option options[] = {
{ .doc = N_("Receiving options:") },
{ "one-shot", '1', 0, 0, N_("end receiving after
first message") },
{ "wideband", 'w', 0, 0, N_("use wideband
receiver aka learning mode") },
- { "no-wideband",'n', 0, 0, N_("use normal
narrowband receiver, disable learning mode") },
+ { "narrowband",'n', 0, 0, N_("use narrowband
receiver, disable learning mode") },
{ "carrier-range", 'R', N_("RANGE"), 0, N_("set receiver
carrier range") },
{ "measure-carrier", 'm', 0, 0, N_("report carrier
frequency") },
{ "no-measure-carrier", 'M', 0, 0, N_("disable reporting
carrier frequency") },
--
2.20.1
