Hi (again) Jacopo,

I found something else in this patch unfortunately :-(

On 2019-01-14 15:55:33 +0100, Niklas Söderlund wrote:
> Hi Jacopo,
> 
> Thanks for your patch.
> 
> On 2019-01-10 15:02:10 +0100, Jacopo Mondi wrote:
> > The ADV748x chip supports routing AFE output to either TXA or TXB.
> > In order to support run-time configuration of video stream path, create an
> > additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
> > from existing ones.
> > 
> > Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> > Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> > ---
> >  drivers/media/i2c/adv748x/adv748x-csi2.c | 44 +++++++++++++-----------
> >  1 file changed, 23 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c 
> > b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > index b6b5d8c7ea7c..8c3714495e11 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > @@ -27,6 +27,7 @@ static int adv748x_csi2_set_virtual_channel(struct 
> > adv748x_csi2 *tx,
> >   * @v4l2_dev: Video registration device
> >   * @src: Source subdevice to establish link
> >   * @src_pad: Pad number of source to link to this @tx
> > + * @enable: Link enabled flag
> >   *
> >   * Ensure that the subdevice is registered against the v4l2_device, and 
> > link the
> >   * source pad to the sink pad of the CSI2 bus entity.
> > @@ -34,17 +35,11 @@ static int adv748x_csi2_set_virtual_channel(struct 
> > adv748x_csi2 *tx,
> >  static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
> >                                   struct v4l2_device *v4l2_dev,
> >                                   struct v4l2_subdev *src,
> > -                                 unsigned int src_pad)
> > +                                 unsigned int src_pad,
> > +                                 bool enable)
> >  {
> > -   int enabled = MEDIA_LNK_FL_ENABLED;
> >     int ret;
> >  
> > -   /*
> > -    * Dynamic linking of the AFE is not supported.
> > -    * Register the links as immutable.
> > -    */
> > -   enabled |= MEDIA_LNK_FL_IMMUTABLE;
> > -
> >     if (!src->v4l2_dev) {
> >             ret = v4l2_device_register_subdev(v4l2_dev, src);
> >             if (ret)
> > @@ -53,7 +48,7 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 
> > *tx,
> >  
> >     return media_create_pad_link(&src->entity, src_pad,
> >                                  &tx->sd.entity, ADV748X_CSI2_SINK,
> > -                                enabled);
> > +                                enable ? MEDIA_LNK_FL_ENABLED : 0);
> >  }
> >  
> >  /* 
> > -----------------------------------------------------------------------------
> > @@ -68,25 +63,32 @@ static int adv748x_csi2_registered(struct v4l2_subdev 
> > *sd)
> >  {
> >     struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> >     struct adv748x_state *state = tx->state;
> > +   int ret;
> >  
> >     adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
> >                     sd->name);
> >  
> >     /*
> > -    * The adv748x hardware allows the AFE to route through the TXA, however
> > -    * this is not currently supported in this driver.
> > +    * Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
> > +    * HDMI.
> >      *
> > -    * Link HDMI->TXA, and AFE->TXB directly.
> > +    * The HDMI->TXA link is enabled by default, as is the AFE->TXB one.
> >      */
> > -   if (is_txa(tx) && is_hdmi_enabled(state))
> > -           return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> > -                                             &state->hdmi.sd,
> > -                                             ADV748X_HDMI_SOURCE);
> > -   if (is_txb(tx) && is_afe_enabled(state))
> > -           return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> > -                                             &state->afe.sd,
> > -                                             ADV748X_AFE_SOURCE);
> > -   return 0;
> > +   if (is_afe_enabled(state)) {
> > +           ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
> > +                                            &state->afe.sd,
> > +                                            ADV748X_AFE_SOURCE,
> > +                                            is_txb(tx));
> > +           if (ret)
> > +                   return ret;
> > +   }
> > +
> > +   /* Register link to HDMI for TXA only. */
> > +   if (is_txb(tx) || !is_hdmi_enabled(state))
> 
> Small nit, I would s/is_txb(tx)/!is_txa(tx)/ here as to me it becomes 
> easier to read. With or without this change,
> 
> Reviewed-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> 
> > +           return 0;
> > +
> > +   return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
> > +                                     ADV748X_HDMI_SOURCE, true);

If the call to adv748x_csi2_register_link() fails should not the 
(possible) link to the AFE be removed?

> >  }
> >  
> >  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
> > -- 
> > 2.20.1
> > 
> 
> -- 
> Regards,
> Niklas Söderlund

-- 
Regards,
Niklas Söderlund

Reply via email to