Hi Jacopo,
On Fri, Dec 29, 2017 at 01:22:26PM +0100, Jacopo Mondi wrote:
> The following commits:
> commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for
> ov7675")
> commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll
> for ov7675")
> introduced the ability to bypass PLL multiplier and use input clock (xvclk)
> as pixel clock output frequency for ov7675 sensor.
>
> PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675
> sensor manuals. Macros used to set DBLV register seem wrong in the
> driver, as their values do not match what reported in the datasheet.
>
> Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to
> default 0x0a reserved value (according to datasheets).
>
> While at there, remove a write to DBLV register in
> "ov7675_set_framerate()" that over-writes the previous one to the same
> register that takes "info->pll_bypass" flag into account instead of setting
> PLL
> multiplier to 4x unconditionally.
>
> And, while at there, since "info->pll_bypass" is only used in
> set/get_framerate() functions used by ov7675 only, it is not necessary
> to check for the device id at probe time to make sure that when using
> ov7670 "info->pll_bypass" is set to false.
>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
I assume this is still valid and long overdue for merging. :-) No other
work in the area seem to have been done so I'm picking it up...
--
Regards,
Sakari Ailus
