On Thu, 2018-11-22 at 14:21 +0200, Sakari Ailus wrote:
> Hi Lubomir,
>
> On Tue, Nov 20, 2018 at 11:03:08AM +0100, Lubomir Rintel wrote:
> > The commit 71862f63f351 ("media: ov7670: Add the ov7670_s_power function")
> > added a power control routing. However, it was not good enough to use as
> > a s_power() callback: it merely flipped on the power GPIOs without
> > restoring the register settings.
> >
> > Fix this now and register an actual power callback.
> >
> > Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
> >
> > ---
> > Changes since v2:
> > - Restore the controls, format and frame rate on power on
> >
> > drivers/media/i2c/ov7670.c | 50 +++++++++++++++++++++++++++++++++-----
> > 1 file changed, 44 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
> > index ead0c360df33..cbaab60aaaac 100644
> > --- a/drivers/media/i2c/ov7670.c
> > +++ b/drivers/media/i2c/ov7670.c
> > @@ -242,6 +242,7 @@ struct ov7670_info {
> > struct ov7670_format_struct *fmt; /* Current format */
> > struct ov7670_win_size *wsize;
> > struct clk *clk;
> > + int on;
> > struct gpio_desc *resetb_gpio;
> > struct gpio_desc *pwdn_gpio;
> > unsigned int mbus_config; /* Media bus configuration flags */
> > @@ -1615,19 +1616,54 @@ static int ov7670_s_register(struct v4l2_subdev
> > *sd, const struct v4l2_dbg_regis
> > }
> > #endif
> >
> > -static int ov7670_s_power(struct v4l2_subdev *sd, int on)
> > +static void ov7670_power_on(struct v4l2_subdev *sd)
> > {
> > struct ov7670_info *info = to_state(sd);
> >
> > + if (info->on)
> > + return;
> > +
> > if (info->pwdn_gpio)
> > - gpiod_set_value(info->pwdn_gpio, !on);
> > - if (on && info->resetb_gpio) {
> > + gpiod_set_value(info->pwdn_gpio, 0);
> > + if (info->resetb_gpio) {
> > gpiod_set_value(info->resetb_gpio, 1);
> > usleep_range(500, 1000);
> > gpiod_set_value(info->resetb_gpio, 0);
> > usleep_range(3000, 5000);
> > }
> >
> > + info->on = true;
> > +}
> > +
> > +static void ov7670_power_off(struct v4l2_subdev *sd)
> > +{
> > + struct ov7670_info *info = to_state(sd);
> > +
> > + if (!info->on)
> > + return;
> > +
> > + if (info->pwdn_gpio)
> > + gpiod_set_value(info->pwdn_gpio, 1);
> > +
> > + info->on = false;
> > +}
> > +
> > +static int ov7670_s_power(struct v4l2_subdev *sd, int on)
> > +{
> > + struct ov7670_info *info = to_state(sd);
> > +
> > + if (info->on == on)
> > + return 0;
> > +
> > + if (on) {
> > + ov7670_power_on (sd);
> > + ov7670_apply_fmt(sd);
> > + ov7675_apply_framerate(sd);
> > + v4l2_ctrl_handler_setup(&info->hdl);
> > + } else {
> > + ov7670_power_off (sd);
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -1660,6 +1696,7 @@ static int ov7670_open(struct v4l2_subdev *sd, struct
> > v4l2_subdev_fh *fh)
> > static const struct v4l2_subdev_core_ops ov7670_core_ops = {
> > .reset = ov7670_reset,
> > .init = ov7670_init,
> > + .s_power = ov7670_s_power,
> > #ifdef CONFIG_VIDEO_ADV_DEBUG
> > .g_register = ov7670_g_register,
> > .s_register = ov7670_s_register,
> > @@ -1825,6 +1862,7 @@ static int ov7670_probe(struct i2c_client *client,
> > else
> > return ret;
> > }
> > +
> > if (info->clk) {
> > ret = clk_prepare_enable(info->clk);
> > if (ret)
> > @@ -1841,7 +1879,7 @@ static int ov7670_probe(struct i2c_client *client,
> > if (ret)
> > goto clk_disable;
> >
> > - ov7670_s_power(sd, 1);
> > + ov7670_power_on(sd);
> >
> > /* Make sure it's an ov7670 */
> > ret = ov7670_detect(sd);
> > @@ -1929,7 +1967,7 @@ static int ov7670_probe(struct i2c_client *client,
> > hdl_free:
> > v4l2_ctrl_handler_free(&info->hdl);
> > power_off:
> > - ov7670_s_power(sd, 0);
> > + ov7670_power_off(sd);
> > clk_disable:
> > clk_disable_unprepare(info->clk);
> > return ret;
> > @@ -1945,7 +1983,7 @@ static int ov7670_remove(struct i2c_client *client)
> > v4l2_ctrl_handler_free(&info->hdl);
> > clk_disable_unprepare(info->clk);
> > media_entity_cleanup(&info->sd.entity);
> > - ov7670_s_power(sd, 0);
> > + ov7670_power_off(sd);
> > return 0;
> > }
> >
>
> Could you consider instead switching to runtime PM? A few drivers such as
> the ov2685 driver does that already.
Yes, I'll take a look. Thanks for the suggestion. I didn't know such
thing exists, so it may take some time for me to grasp it though.
Take care,
Lubo
>
