Now that we have specific nodes for the H3 and H5 system-controller
that allow proper access to the EMAC clock configuration register,
we no longer need a common dummy syscon node.
Switch the syscon label over to each platform's dtsi file.
Signed-off-by: Paul Kocialkowski <paul.kocialkow...@bootlin.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 2 +-
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ------
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
3 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 7157d954fb8c..b337a9282783 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -134,7 +134,7 @@
};
soc {
- system-control@1c00000 {
+ syscon: system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
reg = <0x01c00000 0x1000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4b1530ebe427..9175ff0fb59a 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -152,12 +152,6 @@
};
};
- syscon: syscon@1c00000 {
- compatible = "allwinner,sun8i-h3-system-controller",
- "syscon";
- reg = <0x01c00000 0x1000>;
- };
-
dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index c2d14b22b8c1..4f0e2df875ba 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -94,7 +94,7 @@
};
soc {
- system-control@1c00000 {
+ syscon: system-control@1c00000 {
compatible = "allwinner,sun50i-h5-system-control";
reg = <0x01c00000 0x1000>;
#address-cells = <1>;
--
2.19.1
