Hi Marco,
On Mon, Aug 13, 2018 at 11:25:08AM +0200, Marco Felsch wrote:
> Don't en-/disable the interrupts during s_stream because someone can
> disable the stream but wants to get informed if the stream is locked
> again. So keep the interrupts enabled the whole time the pipeline is
> opened.
>
> Signed-off-by: Marco Felsch <[email protected]>
> ---
> drivers/media/i2c/tvp5150.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index e736f609fecd..e296f5bfae21 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -1389,11 +1389,26 @@ static const struct media_entity_operations
> tvp5150_sd_media_ops = {
> /****************************************************************************
> I2C Command
>
> ****************************************************************************/
> +static int tvp5150_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + unsigned int val = 0;
> +
> + if (on)
> + val = TVP5150_INT_A_LOCK;
> +
> + if (decoder->irq)
> + /* Enable / Disable lock interrupt */
> + regmap_update_bits(decoder->regmap, TVP5150_INT_ENABLE_REG_A,
> + TVP5150_INT_A_LOCK, val);
Could you use runtime PM instead?
For an example, the dw9714 driver does this: drivers/media/i2c/dw9714.c .
> +
> + return 0;
> +}
>
> static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
> {
> struct tvp5150 *decoder = to_tvp5150(sd);
> - unsigned int mask, val = 0, int_val = 0;
> + unsigned int mask, val = 0;
>
> mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
> TVP5150_MISC_CTL_CLOCK_OE;
> @@ -1406,15 +1421,10 @@ static int tvp5150_s_stream(struct v4l2_subdev *sd,
> int enable)
> val = decoder->lock ? decoder->oe : 0;
> else
> val = decoder->oe;
> - int_val = TVP5150_INT_A_LOCK;
> v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);
> }
>
> regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);
> - if (decoder->irq)
> - /* Enable / Disable lock interrupt */
> - regmap_update_bits(decoder->regmap, TVP5150_INT_ENABLE_REG_A,
> - TVP5150_INT_A_LOCK, int_val);
>
> return 0;
> }
> @@ -1616,6 +1626,7 @@ static const struct v4l2_subdev_core_ops
> tvp5150_core_ops = {
> .g_register = tvp5150_g_register,
> .s_register = tvp5150_s_register,
> #endif
> + .s_power = tvp5150_s_power,
> };
>
> static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
--
Kind regards,
Sakari Ailus
[email protected]
